1983-1986 Toyota Radio Wire Harnesses
Note: using an optional snap on wire harness adapter will simplify the wiring. Most snap on wire harness adapters have already converted and color coded the wires from the auto makers in dash wire harness to match typical aftermarket radio wire colors. ** The wire colors listed in the chart above are typical for these vehicles during these years but may not be the exact colors for this vehicle. This is another reason to use a snap on wire harness adapter. **
Read more
1999-2000 Toyota Camry Radio Replacement
The plastic dash panel surrounding the radio and air conditioner controls must be unsnapped from the dash in order to gain access to the bolts which secure the radio. Pull out the ashtray at the bottom of the plastic dash panel. With your hands, grab the bottom of the plastic dash panel below the ashtray location and pull firmly until the plastic dash panel begins to unsnap from the dash. Continue to pull the dash until the sides and top of the dash panel completely unsnap from the main dash assembly. The radio is secured to the dash with four (4) 10 mm bolt screws, (1) at each side corner of the radio. Locate and remove all four bolt screws. Pull the radio out of the dash. Unplug the black cable plugged into the rear of the radio. Unplug (2) white plastic wire harness connectors snapped into the rear of the radio. The radio can now be completely removed from the dash.
Read more
05 Toyota Camry SIRIUS Satellite Radio Operation Instructions
This section describes some of the basic features on Toyota audio systems. Some information may not pertain to your system. Your audio system works when the ignition key is in the “ACC” or “ON” position. TURNING THE SYSTEM ON AND OFF Push “PWR·VOL” to turn the audio system on and off. Push “AM”, “FM1”, “FM2”, “FM1·2”, “FM”, “SAT”*, “TAPE”, “CD” or “DISC” to turn on that function without pushing “PWR·VOL”. You can turn on each player by inserting a cassette tape or compact disc.
Read more
1986 Toyota Corolla (RWD) Wiring Diagram Symbols
The wiring diagrams and technical service bulletins, containing wiring diagram changes, are obtained from the domestic and import manufacturers. These are checked for accuracy and are all redrawn into a consistent format for easy use. All diagrams are arranged with the front of the vehicle at the left side of the first page and the rear of the vehicle at the right side of the last page. Accessories are shown near the end of the diagram. Components are shown in their approximate location on the vehicle. Due to the constantly increasing number of components on vehicles today, it is impossible to show exact locations. In the past, when cars were simpler, diagrams were simpler. All components were connected by wires, and diagrams seldom exceeded 4 pages in length. Today some wiring diagrams require more than 16 pages. It would be impractical to expect a service technician to trace a wire from page 1 across every page to page 16.
Read more
1991-1996 Ford Escort Radio Replacement
STEP 1: The Ford radio is snapped into the vehicles dash. With the proper tool, known as Ford radio removal keys, the Ford radio can be pulled forward out of the dash. A clothes hanger can be used instead of actual Ford radio removal keys. Cut the clothes hanger and bend 2 pieces in the shape as shown in the photos above. For more information on how to remove the radio, see the diagram below.
Read more
2007 Toyota Camry Hybrid Sirius Satellite Radio Tuner
Install the Antenna. (a) Clean the antenna mounting location behind the rear view mirror with approved cleaner. (Fig 3-1) Note: Mounting location must be completely dry & installation temperature must be between 60° – 100° F before mounting the antenna.
(b) Remove the 2 release tabs from the back of the antenna, and place the antenna in the proper position. (1) 1 – 4 mm just right of the mirror mount behind the rear view mirror for vehicles with EC mirror. (Fig. 3-1) (2) Centered behind the mirror for vehicles without EC mirror. (Fig. 3-2) (3) By hand firmly apply pressure upward on the antenna to assure complete wet-out of the tape pads. (Fig. 3-2)
Read more
2007 Toyota Camry Hybrid Sirius XM Radio Satellite Installation
Cable Routing and Installation (a) Install and route the tuner cable from the center cluster and along the front support bar. (Fig. 3-1) (b) Provide sufficient cable slack to connect to the tuner, and then secure the cable to the existing wire harness with lock tie. Cut excess off lock tie. Connect wire harness to head unit. (c) Using lock ties attach to existing W /H. Trim lock tie excess. (Fig. 3-2) (d) Route to the existing clamps. (Fig. 3-2) (f) Route the cable as shown and secure with lock tie. Trim lock tie excess. (Fig. 3-4) (g) Route the tuner cable under the rear passenger seat and secure with cushion tape. (Fig. 3-5) NOTE:Clean the area for the cushion tape with the approved cleaner.
Read more
1985-1993 Cadillac Fleetwood Radio Replacement Installation
Remove Factory Radio
STEP 1: Locate and remove two (2) phillips screws that secure the top of the plastic panel that surrounds the radio. The plastic dash panel will pull off once the screws are removed as shown in the photo above.
STEP 2: The front of the radio is held in with two (2) 7mm bolt screws at the top of the radio. Remove the 2 bolt screws.
STEP 3: There is a hidden radio that secures the rear of the radio and is located under the radio. Pull the ashtray to its extended position. You will need to lay on your back or side and look behind the ashtray, up to the bottom of the radio.
STEP 4: Once the ashtray has been pull to its extended position, you should be able to locate and remove one (1) 7mm bolt screw as seen in the photo above.
Read more
Nissan Satellite Radio Diagnostic Information
Applied Vehicles: All 2004 Nissan Vehicles and later – equipped with XM® or SIRIUS™ Satellite Radio Receiver and Service.
IF YOU CONFIRM: A satellite (SAT) radio related incident has occurred on a Nissan vehicle factory equipped with SAT radio.
ACTIONS: First, refer to Chart A (page 2) for a list of Nissan vehicles that are pre-wired for SAT radio.
Second, refer to the Service Information section (page 3) in this bulletin. The Audio unit, SAT receiver, and Satellite Service may be OK.
Third, refer to the Service Procedure section (page 6) of this bulletin.
The Service Procedure section contains a Diagnostic Flowchart. It will provide Symptoms and Possible Causes to help you judge the SAT radio condition.
Read more
Chrysler-Dodge Radio Wire Harnesses Installation
If your original radio had a braided strap bolted to the rear of the radio.
TIP: Crimp a ring terminal to the new radios ground wire and insert a bolt through both connectors to connect the ring terminal of the braided ground wire to the ring terminal attached to the new radios ground wire.
If your original radio had a plastic connector containing a single wire plugged into the rear of the radio.
TIP: Crimp a male tab spade to the new radios ground wire. Slide it into the female tab spade connector that had originally snapped into the rear of the factory radio.
Read more
