2004-2006 Ford 5.4L 3V F-150 Truck Intercooled Supercharger System
Step-by-step instructions for installing the best in supercharger systems. INSTALLATION MANUAL Magna Charger FORD 5.4 Liter 3V Engine, 2004-2006 F-150 TRUCK
Please take a few moments to review this manual thoroughly before you begin work: A quick parts check to
make certain your kit is complete (See shipper parts list in this package). If you discover shipping damage
or shortage, please call our office immediately. Take a look at exactly what you are going to need in terms of
tools, time, and experience. Review our limited warranty with care. When unpacking the supercharger kit DO
NOT lift the supercharger assembly by the black plastic bypass actuator. This is pre-set from the factory and
can be altered if used as a lifting point!
Read more
2004-2005 Cadillac CTS-V Intercooled Supercharger System Installation
Step-by-step instructions for installing the best in supercharger systems.
1. Start the supercharger installation by removing the lower rear seat cushion by pushing in at the base and then pulling up. Remove the cushion to gain access to the two rear fuse centers located where the carpet meet the seat base.
2. Once the seat cushion has been removed pull back the carpet where it meets the seat base on the left (driver) side to expose the fuse center. Remove the fuse center cover and examine the legend printed inside the cover to locate the fuse marked “Audio”. Remove the 10 amp “Audio” fuse so the vehicles PCM (engine management computer) can be re-programed safely. THIS FUSE MUST BE REMOVED BEFORE REPROGRAMING!
Read more
2004 Audi RSQ Concept
The futuristic film car Audi RSQ was presented to the public for the first time on April 7, 2004 at the New York International Automobile Show. Audi tackles its most ambitious product placement project ever: For the epic event motion picture „I, ROBOT“, Audi Design developed the spectacular vehicle, which helps leading actor Will Smith – a homicide detective in the year 2035 – solve a mystery that could have grave consequences for the human race.
Read more
2004 Audi A4 1.8T Complete Report
2004 Audi A4 1.8T (5-Spd.) An all-new car, codenamed E90 arrives, with an aluminum-intensive rear-drive chassis. Enlarged to match A4/C-class dimensions as 1-series comes in to fill entry-level niche, the car will also offer electrohydraulic brakes, Active front steering. 3.6-liter V-8 268-hp in top 335 or 336 model, M3 to get more power. Sedan and wagon body styles will wear 3-series nomenclature, while the coupe and convertible are spun off as 4-series models.
Read more
2007 ROUSH Ford Shelby GT500 Supercharger
The new Ford Racing GT500 Supercharger pushes the horsepower to 605 with 554 lb.-ft of torque while keeping a 1-year/12,000 mile drivetrain warranty. The complete system also includes a cold air kit and a Ford Racing ProCal(TM) calibration tool.
“Ford developed a magnificent engine with the creation of the 5.4-liter V-8 engine. They are able to pull 500 horsepower which is amazing for a street car and it’s no wonder it has quickly become one of the most sought-after Mustangs,” said Jack Roush. “But we thought we could get a little more out of that engine. In tandem, we were able to pull another 105 horsepower without compromising the warranty and I have no doubt that this new Ford Racing Supercharger will be in very high demand by owners of the Shelby GT500.”
Read more
2002 Dodge 5.9L Ram 1500 Novi 2000 Supercharger
Owner’s Installation Guide for the Paxton Automotive Novi 2000 Supercharger for the 2002 Dodge 5.9L Ram 1500. You have purchased the finest street Supercharger available for the 2002 5.9L Dodge Ram 1500. The centerpiece of this kit is the highly efficient and reliable Paxton Automotive Corp. NOVI-2000 supercharger. A mechanically driven (by belt) centrifugal blower (supercharger).
Read more
2004 Audi A3 Direct Petrol Injection and Ignition System
Mixture preparation – injection Servicing injection system General notes on self-diagnosis
♦ The engine control unit has a self-diagnosis capability. Before carrying out repairs and fault finding the fault memory must be interrogated. The vacuum hoses and connections must also be checked (unmetered air).
♦ Fuel hoses in engine compartment must only be secured with spring-type clips. Clamping-type or screw-type clips must not be used.
♦ A voltage of at least 11.5 V is required for proper operation of the electrical components.
Read more
1996-1999 Chevy/GMC S-10 Pickup/SUV, 4.3L Engine Powerdyne Supercharger Kit Installation
This manual is intended for the installation of Powerdyne Supercharger kit, Part Number K10525 on Chevrolet and GMC S-10/15 Pickup and SUV’s with the 4.3 liter Vortec motor, model years 1996-1999. This kit is designed to be 50 state smog legal and as of the writing of this manual C.A.R.B. (California Air Resources Board) exemption is pending. This kit already complies with EPA memorandum 1A, making it smog legal in 49 states providing your states pollution laws do not supercede EPA memorandum 1A.
Read more
1997-2000 Toyota Tacoma TRD’s 3.4-liter V6 Supercharger Kit Installation Instructions
Removal Procedure A. Preparation for Removal of Stock Intake Manifold • Before you and engine compartment.thatyou don’t, grease clean begin, TRD recommends you thoroughly If on parts could become dislodged during the procedure and fall into the engine. • Make sure the engine has cooled fully before you begin. • To help you later, we you disconnect anything. You can doengine’s suggest you draw diagrams of your cable routing before for the vacuum hoses; however, some of the vacuum connections on your stock manifold may not be the same as those on the supercharger. To ensure the proper hose connections, refer to the diagrams in the back of this manual. • Thestock nuts and bolts.kitTherefore, as you remove them, keep TRD supercharger has been designed to reuse most of them with their components or label them for location. This will assure a faster, easier installation.
Read more
2004+ Audi A6/A8/Q7 NV_AUDIA6A8 Nav Video Installation Guide
Warning
1. Before working, please make sure the vehicle power is off (please keep in mind when pulling out the
key, only monitor supply would be off but whole vehicle power supply would be off 5 minutes later).
2. Starting with separating of the monitor and the connecter removed in working may causes an error code. Do not start until the work is done.
3. Please use appropriate measure of tools
4. Do not force excessively in assembling or disassembling, tightening or pulling
5. Using protecting clothes or taping around the working area, take care of scars
6. Please make sure to connect the power cable using a fuse when you use it with pulling out the power supply.
Read more
