Acura/Honda Car2PC-HON1 adapter for Car PC / laptop integration into car stereo
Preparation
1. Turn off car engine and remove key from ignition
2. Un-mount your radio from the dash in order to get access to the back side of the radio.
Adapter installation
3. Attach square 14 pins connector to the back of the Honda stereo.
4. Find a place where you can place Car2PC. In many cars there is enough room in the dash to place Car2PC.
Note: Make sure you mount Car2PC in a place with enough room so when you mount the car stereo back you do not break the adapter
Read more
2008 Chevrolet Silverado 2500HD & 3500HD
Chevrolet Silverado introduced all-new heavy-duty pickups during the ’07 model year. They were highlighted by all-new and differentiated exterior designs, two unique interiors and class-leading power and efficiency. They roll into 2008 ready for work or leisure, with minor refinements and enhancements, while still loaded with include segment-leading and segment-exclusive features.
Read more
2007 Chevrolet Silverado HD Crew Z71
Taking cues from Dale Earnhardt Jr.’s “Big Red” Silverado that debuted at SEMA in 2006, the ‘08 Silverado HD Crew Z71 Big Red demonstrates how that expressive concept’s unique features would look with production-type components. It combines numerous GM Accessories inspired by Earnhardt’s Big Red and features additional custom touches. It also supposes the popular Z71 off-road package on the Silverado 2500HD – a model not offered by the factory. It’s powered by the 6.6L Duramax turbo-diesel V-8 and a six-speed Allison transmission.
Read more
2007 Chevrolet Silverado All American Baseball Edition
The only thing missing from this home-run Silverado is the apple pie – because the baseball and Chevrolet are covered. The Silverado 1500 crew cab is decked out in a baseball theme – with a paint scheme that incorporates all major league team logos – to support Chevrolet’s ties to Major League Baseball. It is also a fan’s dream, with a power-lifting tonneau cover that rises to reveal a wide-screen television monitor that not only brings in the game, but is connected to a Wii gaming console . Inside, the Silverado features real baseball bat ash wood trim and uniquely trimmed leather seats that have the look and feel of a baseball – including the stitching.
Read more
2007 Chevrolet Silverado HD 3500 Crew
The spirit of the country music culture is infused in this rolling sound stage, which has been used at the Country Music Festival and other country music artist venues. The bed and tonneau cover of the Silverado 3500HD crew cab open to reveal a makeshift stage, complete with lighting and power for microphones and amplifiers. A music-inspired graphics package and unique wheels dress up the exterior, while the interior has saddle-like aniline leather trim that is complemented by real wood accents and guitar-style mother-of-pearl inlays.
Read more
HP10005 Air Suspension Kit for GMC/Chevrolet 2500 HD/3500 2WD/4WD
This kit includes “push to connect” airline fittings. They require the end of the airline to be round, square and cleanly cut to ensure the internal seal will not leak. The airline must only be cut with a sharp razor knife or hose cutter.
PREASSEMBLY OF THE AIR SPRINGS THE UPPER PLATE
1. Place the upper roll plate (with the rounded side towards the air spring) on the top of the air spring (top being the end with the air port). Repeat on the other air spring.
2. Install the air fittings supplied into the inlet ports of the air springs, use thread sealant to prevent air leaks. The air spring ports will be installed towards the center of the vehicle. The passengers side fitting will point towards the front of the vehicle. Do not over tighten the fittings.
THE UPPER BRACKET
3. Place the drivers side upper mounting bracket on top of air spring aligning the two mounting holes as shown in the photo.
Note: The driver side bracket mounts to the air spring through the elongated holes on each side of the air inlet port cutout. The passenger side bracket mounts to the air spring through the elongated holes opposite the air inlet port cutout.
THE LOWER BRACKET
4 Install the clinch stud into the drivers side lower bracket hole, shown in the photo. This is an interference fit into the bracket. Clinch stud not required on the passengers side lower bracket. 2500 model only (3/4 ton trucks) require a 3/8″ bolt and nut to be installed in both lower brackets as shown. The bolt head is installed opposite the air spring. The nut will fit inside the roll plate cavity. Tighten the nut securely.
2004 Chevy Silverado 1500 AMSOIL BMK-13 Installation
Rough measurements revealed the engine compartment of this 2004 Silverado was just too cramped to cleanly fit the BMK- 13 filter mount with EaO-15 and EaBP-90 Filters. I located a suitable vertical underbody “lip”, inside the frame on the dri- ver’s side, back by the ABS EBCM/Hydraulic manifold (see photos). Before ordering the kit I pre-measured, and figured about a five-foot hose run from the spin-on filter adaptor to the chosen filter mount location and ordered extra hose. I used a BK-11 90-degree fitting kit for the hose to spin-on filter adaptor connection (see photos). I ended up using about 4′ 8″ of hose for each line, so eight feet might do the job with a little tighter routing.
Read more
2003-09 Dodge Ram 2500/3500 II Mount Kit Installation Instructions
For easier assembly and installation, vehicle and all snowplow components should be on a smooth, level, hard surface, such as concrete.
1. Remove license plate bracket and retain for vehicle owner. Remove bumper from bumper brackets. Retain fasteners.
2. Remove bumper brackets from frame. Diesel and V10 applications: On these applications, you must first remove the top two intercooler fasteners. Then push intercooler up and out to provide clearance to remove bumper bracket bolt assembly. Retain fasteners. Vehicles equipped with tow hooks will need tow hooks and tow hook brackets removed. These cannot be reinstalled with plow mount. Retain tow hooks, brackets and fasteners for reinstallation if snowplow is removed.
Read more
2001-2003 Chevrolet Silverado Ignition Distributor System Corrosion Inspect/Replace
General Motors has decided to conduct a Voluntary Emission Recall involving certain 2001-03 Chevrolet Silverado and GMC Sierra model vehicles, equipped with a 4.3L V6 (RPO L35 – VIN W or RPO LU3 – VIN X) engine. The ignition distributor cap and rotor in these vehicles may corrode and cause ignition system failure. This condition may result in rough engine idle, misfire, stalls, engine cranks but does not run and/or illumination of the Malfunction Indicator Lamp (MIL).
Read more
1998 Mercedes Benz SLK 230 L4-2.3L SC Rear Center Console Remove/Install
Removing And Installing Rear Center Console
Removing And Installing Front Center Console
AR68.20-P-2350G Remove/Install Cover on Center Console
Removing And Installing Cover On Center Console
Read more
