2007 Porsche Boxster S Removing Cover for Dashboard
Removing cover for center dashboard (defroster trim)
Installation Location: 1. Insert plastic wedge under dashboard cover (defroster trim) center -1- and lever out in upward direction – 2. Disconnect plug connection for sun sensor.
Read more
Ford 4.2L Intake Manifold and Timing Cover Gaskets
Ford 4.2L truck and van engines manufactured from 1997 to 2001 have had problems with coolant leaking into the engine oil and into the cylinders. A failed intake manifold gasket or a failed timing cover gasket may cause the coolant to leak into the oil, but coolant leaking into the cylinders is almost always caused by failure of the intake manifold gasket. These problems have been widely reported in several service bulletins over the years.
Read more
47-55 Chevy Truck the Eureka Gas Tank Cover Installation Instructions
INSTALLATION KIT
1) Test each corner for fit to ensure that the CORNERS and CENTER fit correctly.
2) If you are using the tank cover without a gas tank in the truck (IT’S POSSIBLE) you may decide that you want a little more support. If this is the case, braces can be formed from ¾” plywood, angle iron, or MDF pressboard. The areas that need the most support in directly under the package tray area, this is especially important if installing a radio or CD player onto the flat of the package tray.
3) Apply the Foam Edge Tape to the backside of the cover at the top edge and down the sides on the back edge only.
Read more
Nissan Frontier XSB/SB Electric Retractable Truck Bed Cover
The Bedlocker is designed to carry rainwater from the cover into the canister and then out through the drains. Most truck models have standard OE drain holes or plastic/rubber access ports in the front of the truck bed. Check to make sure your truck has the OE drain holes so that drilling into the sheet metal is not required. If drilling is necessary, be sure to check the underside of the truck bed for the best location. Read more
55-59 Chevy Truck Kobi Rear Cab Cover Installation
Test each corner for fit to ensure that the corners are correct.
Option #1: If covering each piece separately:
A) Start by applying the foam edge tape to corner pieces by running it along the entire edge of the panel stopping at both the top and the bottom where the edge of the panel meets the step where the corner pieces are fitted and fixed into the center section. Apply foam tape along the edge of entire center section, keeping the same idea to stop short of the sides that contain the mounted retainer strips that corner pieces will be mounted on.
Read more
2007 Volvo XC60 Sleek Concept Breaks Cover
The XC60 concept required teamwork at a record speed of eight months and involved 70 members of staff from experts in milling techniques, lathe operators and sheet-metal workers to upholstery experts, technicians and engineers.
Now visitors to the MPH Show can view the Volvo XC60 Concept for the first time and take in all the new design cues that will become characteristic of future Volvos, such as the expressive, sculptured tail lights to highlight Volvo’s broad, muscular shoulders and an enlarged version of the classic Volvo iron mark on the front grille. The XC60 Concept joins the all-new Volvo XC70 and XC90 in Volvo’s All Wheel Drive (AWD) ‘XC’ (Cross Country) model range.
Show-goers will also have the opportunity to view the all-new Volvo V70 and XC70 premium estates plus the funky C30 SportsCoupe and the smart Volvo S40 saloon in new R-Design Sport specification, which are all on show in the gallery.
Volkswagen Touareq Fuel Filter Replacing (Diesel Engine)
There are two different fuel filter systems in Touareq. In system 1, the fuel filter is located on the engine, under the engine cover. In system 2, the fuel filter is located to the left in the engine compartment, on the strut tower. Special tools, testers and auxiliary items required Remove engine cover Upper engine cover, removing and installing .
Read more
Range Rover Engine Cylinder Head Components
1. Rocker cover – right hand 2. Engine oil filler cap 3. Oil filler dust cap seal 4. ’O’ ring – oil filler cap 5. Bolt – rocker cover (4 off; 2 x short, 2 x long) 6. Rocker cover – left hand 7. Gasket – rocker cover 8. Cylinder head – left hand 9. Valve spring cap (16 off) 10. Valve stem oil seals (16 off) 11. Collets (16 pairs) 12. Valve spring (16 off) 13. Valve seat insert (16 off) 14. Exhaust valve (8 off) 15. Inlet valve (8 off) 16. Seal – inlet Read more
2008 Audi A3 Cabriolet Breaks Cover
Sporty, elegant, emotion-packed – the new Audi A3 Cabriolet is making its appearance in perfect time for spring 2008. The open-top Audi A3 is the premium option in the compact class. It offers the sporting genes of the A3 coupled with the uncompromising quality that distinguishes every Audi model. There are four engines to choose from, together with an extensive range of individual equipment options. Sales commence in Germany at the start of February 2008.
Read more
2008 Ford Fusion Engine Lubrication Components
IN-VEHICLE REPAIR Engine Lubrication Components — Exploded View Oil Filter Element, Oil Filter Adapter and Oil Pressure Sender 5 6744 Oil filter element 1 6C684 Oil filter drain plug 6 6884 Oil filter adapter 2 W707718 Oil filter drain plug O-ring seal 7 14A464 Secondary Air Injection (AIR) pump electrical 3 6A832 Oil filter cover connector (part of 12B637) 4 6885 Oil filter cover O-ring seal 8 9A486A AIR pump 12 14A464 EOP switch electrical connector (part of 12B637) 9 W500032 AIR pump bolt (3 required) 13 6A636 Oil filter adapter gasket 10 W500225 Oil filter adapter bolt (4 required) 14 7A508 Clutch slave cylinder bolt (2 required) 11 9278 Engine Oil Pressure (EOP) switch 15 W706360 Clutch slave cylinder (Continued)
Read more
