2005 Ford Taurus Engine Controls Vacuum Leakage Noise Possible DTC’s
Some 2005 Taurus and Sable vehicles equipped with a 3.0L 2V and some 2003-
2005 Lincoln LS vehicles equipped with a 3.0L 4V engine may exhibit a vacuum
leakage noise or lean codes and/or malfunction indicator lamp (MIL) on. The
cause may be a leak at the 0-ring on the intake manifold tuning (IMT) valve.
ACTION
Follow the Service Procedure steps to correct the condition.
Read more
2001-2005 Ford Taurus Camshaft Tick Noise—3.0L 4V Engine
This article supersedes TSB 04-20-8 to update the vehicle model years and Service Procedure. ISSUE Some 2001-2005 Taurus/Sable, 2001-2006 Escape and 2005-2006 Mariner vehicles built prior to 1-17-2006 equipped with the 3.0L 4V Duratec engine may exhibit a ticking noise from the left bank cylinder head, with the engine at normal operating temperature only.
Read more
2003 Ford Taurus V6-3.0L Upper Intake Manifold Removal and Installation
Upper Intake Manifold Removal 1. Remove the air cleaner outlet tube. 1 Remove the hoses. 2 Loosen the clamps. 3 Remove the air cleaner outlet tube. 2. Remove the pin-type retainers and the accelerator cable splash shield. 3. Disconnect the throttle cable and the cruise control cable. 4. Disconnect the Throttle Position Sensor (TPS) and Idle Air Control (IAC) valve electrical connectors. 5. Disconnect the harness from the throttle body stud. 6. Disconnect the Exhaust Gas Recirculation (EGR) vacuum regulator and vacuum supply hoses. 7. Disconnect the Positive Crankcase Ventilation (PCV) and Evaporative Emissions (EVAP) vacuum hoses. 8. Remove the EGR valve. 1 Disconnect the vacuum hose. 2 Remove the nuts. 3 Remove the bolts. 4 Remove the EGR valve. 9. Remove the EGR Vacuum Regulator (EVR) valve. 1 Disconnect the vacuum hose. 2 Disconnect the electrical connector. 3 Remove the bolts. 4 Remove the valve. 10. Remove the eight bolts and the upper intake manifold. Remove and discard the gaskets. Clean all mating surfaces.
Installation
1. Position new gaskets in the upper intake manifold. 2. Position the upper intake manifold and install the bolts in the sequence shown. 3. Install the EGR vacuum regulator valve. 1 Position the valve. 2 Install the bolts. 3 Connect the electrical connector. 4 Connect the vacuum hose.
2008 Ford Taurus Pricing
The new 2008 Ford Taurus – the most powerful, refined, roomiest and safest Taurus ever – will have a base manufacturer’s suggested retail price (MSRP) of $23,995, including destination and delivery. Comparably equipped, Ford’s iconic family sedan will be priced thousands of dollars less than sedans like the Toyota Avalon and the Chrysler 300.
Nearly 7 million Ford Taurus sedans have been built since 1985, and it remains one of the most recognized Ford vehicle names of all time – trailing only the Ford F-Series and Mustang.
Read more
2002 Ford Taurus Upper Intake Manifold Service and Repair
Removal 1. Disconnect the battery ground cable. 2. Remove the air cleaner assembly and the air cleaner outlet tube. 3. Remove the pin-type retainers and the snow shield. 4. Disconnect the accelerator cable, speed control actuator cable and the throttle return spring from the throttle body. 5. Remove the bolts, then position the accelerator cable bracket aside. 6. Disconnect the hoses. – Disconnect the vacuum hose. – Disconnect the evaporative emissions return tube. 7. Disconnect the electrical connectors. – Disconnect the Idle Air Control (IAC). – Disconnect the Throttle Position (TP) sensor. 8. Disconnect the engine wiring harness from the intake manifold support bracket. 9. Remove the upper intake Read more
2000-2003 Ford Taurus Idle Air Control (IAC) Valve Diagnostics Service Tips
Some vehicles, may exhibit drivability conditions. These may include: • No start • Difficult to start • Stall • Low idle • Rough idle • High idle • Hesitation/surge while accelerating or at steady speed
These conditions may be intermittent with no Diagnostic Trouble Codes (DTC) and no Malfunction Indicator Lamp (MIL). In some cases DTC and MIL may be evident.
Read more
2005 Nissan-Datsun Sentra L4-1.8L Evap Canister Purge Volume Control Solenoid Valve
With CONSULT-II
Check air passage continuity of EVAP canister purge volume control solenoid valve
under the given conditions.
Without CONSULT-II
Check air passage continuity of EVAP canister purge volume control solenoid valve
under the given conditions.
Read more
2003-2005 Mazda 6 s V6 Cold Air Intake System Installation
DO NOT install a bypass valve on this intake! Following is the procedures to installation the AEM Cold Air Intake System on your Mazda 6.
Getting started
a) Make sure vehicle is parked on a level surface.
b) Set parking brake.
c) Disconnect both battery terminals.
d) If engine has run within the past two hours let it cool down.
e) Chock rear wheels, jack up front of vehicle and place on properly rated jack stands.
f) Remove front left wheel.
Read more
2008 Ford Taurus LTD AWD
There are several changes for this car, this year. First, it loses the Five Hundred name and is now called Taurus. Next, a 3.5L engine supplants the 3.0L V6 and the continuously variable (CVT) transmission has been retired. Finally, there is a refreshed exterior and improvements to the interior and safety equipment. The drive wheels are up front, but an optional on-demand, four-wheel-drive system is available for both trim versions, SEL and Limited.
Read more
Ford 4.2L Intake Manifold and Timing Cover Gaskets
Ford 4.2L truck and van engines manufactured from 1997 to 2001 have had problems with coolant leaking into the engine oil and into the cylinders. A failed intake manifold gasket or a failed timing cover gasket may cause the coolant to leak into the oil, but coolant leaking into the cylinders is almost always caused by failure of the intake manifold gasket. These problems have been widely reported in several service bulletins over the years.
Read more
