Cadillac Escalade & EXT/ESV Liquid Grille 94215 Harley-Davidson Road King Instalation
A. Pre-installation Preparation
1. Verify kit contents.
2. Remove protective wrapping from inserts and place on a non-abrasive surface.
3. Remove the brackets and hardware from the box.
Read more
Putco Chrome Mesh Grille Insert Installation Sheet
Grille Pre-installation Preparation
Step 1: Locate the weld-in brackets on the back of the CHROMED MESH GRILLE INSERT(S). These brackets can be found around the aluminum perimeter of the grille insert.
Step 2: Place the Black spring clips found in your installation hardware kit on each of the weld-in brackets located on the Read more
2005-Present Pontiac G6 Figure Grille Set Installation Instructions
These grilles are fabricated employing quality materials and finishes, and have been engineered to enhance the look of your vehicle for the duration of its life. Proper installation is essential to your overall satisfaction, so please read these instructions before attempting to install the grilles. Exercise patience; these instructions are intended to assist even the most mechanically challenged.
Read more
2005-Up Pontiac G6 Figure Grille Set Installation Manual
These grilles are fabricated employing quality materials and finishes, and have been engineered to enhance the look of your vehicle for the duration of its life. Proper installation is essential to your overall satisfaction, so please read these instructions before attempting to install the grilles. Exercise patience; these instructions are intended to assist even the most mechanically challenged.
Read more
07 Honda CR-V Grille Guard Installation Instructions
Installation procedure the grille guard on Honda CR-V
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY.
2. Using a flat screwdriver carefully remove all fasteners from factory plastic shroud on top and underneath the vehicle. On the bottom there are (4) on the front and (3) on each side by the fender. On the top there are (7) fasteners.
3. Remove bottom plastic shroud and place it on a working area. Using a hack saw carefully cut the marked area shown in Figure 1.
Read more
2003-04 Cadillac CTS Upper Grille Installation Instructions
Step 1: Remove factory grille shell. First, remove the four plastic screws located on top of the shell (two in the front & two on top). Then remove the four plastic screws located on the bottom (directly behind the grille shell). The bottom screws are much harder to remove as you have limited access to them. You can snap them out which will render them useless for future use, or you can take your time and slowly work (shimmy) them out using a flat head screwdriver.
Note: If you intend to install the grille shell back on to the vehicle you will need the plastic screws to do so. If they are broken when removing the factory shell you will need to purchase new plastic screws from the dealership.
Step 2: Tape over the grille opening to protect finish (see figure 1 & 2). Next, using the necessary cutting tool (die grinder, air/pneumatic saw, jigsaw) carefully cut the plastic guides from the grille (see figures 2, 3 & 4). Do not cut into the exposed portion of the front end.
Step3: Now file down rough spots until smooth (see figures 5 & 6). Once finished you will have a nice smooth surface, which will allow the billet grille to rest unobstructed in the freshly trimmed opening (see figure 7).
Step 4: Fit the grille insert into the trimmed opening, attach the two extension brackets to the top two brackets (left & right) using the 10-24 x 1” cap screws and k-lock nuts provided, then attach the two bottom extension brackets using the 10-24 x 1” cap screws and k-lock nuts. Before tightening be sure that you have the proper distance needed for a precise fit.
2007 Jeep Wrangler Adds Mopar Chrome Grille
Mopar, the Chrysler LLC’s original equipment parts manufacturer, announced it offers a new Chrome Grille for the Jeep Wrangler and Jeep Wrangler Unlimited. An Authentic Jeep Accessory from Mopar, the chrome grille kit also includes a Jeep emblem, hood seal and fasteners.Installing in less than 20 minutes, the chrome grille has a durable and long-lasting finish. Designed and engineered to meet all Chrysler O.E. corrosion protection specifications and standards, the chrome grille also doesn’t affect the Wrangler’s cooling system performance.
Read more
Audi A3 Sportback Self-Study Programme 332
Audi A3 Sportback Audi is defining a new segment in the premium compact class. The A3 Sportback is characterised by the sporting elegance of a coupé and the versatility of a 5-door. The Audi Sportback is deliberately going its own, new way in the compact class. It offers the emphatically sporty qualities and the athletic styling of the three-door version with which it shares its drive train, dynamic suspension and wheelbase. in part or in whole, is not Protected by copyright. Copying for private or commercial purposes, In addition to two rear doors, AG. AUDI AG does more permitted unless authorised by AUDI it offers even not guarantee or accept any liability with respect to the correctness of information in this document. Copyright by AUDI AG. space and variability thanks to its rear end which is a total of 68 millimetres longer than on its threedoor counterpart.
Read more
2004 Audi RSQ Concept
The futuristic film car Audi RSQ was presented to the public for the first time on April 7, 2004 at the New York International Automobile Show. Audi tackles its most ambitious product placement project ever: For the epic event motion picture „I, ROBOT“, Audi Design developed the spectacular vehicle, which helps leading actor Will Smith – a homicide detective in the year 2035 – solve a mystery that could have grave consequences for the human race.
Read more
2007 Audi Metroproject Quattro Concept
The Audi Metroproject Quattro, has a battery pack in visibly mounted in the boot, and lit in tranquil blue lights with a charge indicator on the side.
The supermini Audi A1 should be available with a turbocharged gas engine, turbocharged diesel engine, ranging in size from 1.2 litres to 2.0 litres. A base model with an 80 horsepower, naturally aspirated 1.4 litre engine is also expected to hit showroom floors.
Read more
