2007 Dodge Charger SRT8 Super Bee
The 2007 Dodge Charger SRT8 Super Bee is the first special edition of the “Charger on steroids” from Chrysler Group’s Street and Racing Technology (SRT). It features “Detonator Yellow” exterior color with black hood and deck-lid face, Super Bee logos on front and rear fenders, and contrasting yellow stitching on the seats, steering wheel and shift knob.
Read more
2006 Dodge Charger SRT8
When Dodge unveiled the all-new 2006 Dodge Charger into its lineup, performance-car aficionados had a lot to celebrate. The party gets kicked up a notch with the introduction of the all-new 2006 Dodge Charger SRT8.
With its infusion of Street and Racing Technology (SRT) DNA, the all-new 2006 Dodge Charger SRT8 provides exactly what performance enthusiasts want in their American muscle sedan: more power, world-class ride and handling, benchmark braking, functional and aggressive-looking exterior enhancements and a race-inspired interior.
Read more
2006 Dodge Charger R/T
The Dodge Charger – one of the biggest names from the muscle car era – powered its way out of its storied past and onto the stage at the 2005 North American International Auto Show in Detroit. The much-anticipated 2006 Dodge Charger will muscle its way back to streets and racetracks across America early this summer.
The Charger coming off the line and out of garages this year will create a new reputation for the Dodge legend, featuring a modern design to back up its 21st century muscle car power, sports car handling and cutting-edge technology.
Read more
1968 Dodge Charger III
The model line up expanded to include the Charger R/T, equipped like the Coronet R/T – it came with a 440 Magnum, heavy duty suspension and brakes, and the bulletproof Torqueflite 727 3 speed auto with a 4 speed manual optional. The rear bumblebee stripes were a deletable option. Hemi sales went up to 467, still quite small.
Read more
2005-2006 Dodge Magnum, Chrysler 300C, Dodge Charger Audio System Upgrade Package Installation Instructions
TOOLS REQUIRED: *Phillips Screwdriver *Panel Removal Tool *Pick Tool
Front Door Installation for Magnum, Charger, 300C
1. Using a pick tool pry open the screw covers behind the interior door release lever and below the arm rest and remove the screws. Fig. 1 2. Remove the four screws securing the door panel along the bottom. Fig. 1 3. Using the end of a Phillips screwdriver gently depress the center pin of the three plastic retainers securing the door panel. The center pin of the plastic retainer should depress approximately 1/8” and allow Read more
Chrysler Magnum, Charger, 300C, SRT-8 Anti-roll Bar Set Installation
1) Secure the rear wheels with blocks and jack the front up. Support the front of the vehicle with jack stands on the frame. Observe the stock sway bar orientation and position for reference.
Note: If you are using a 4 post lift or alignment rack, you do not have to jack the front up.
2) Remove the heat shields that cover the subframe mounts using a 10mm wrench or socket.
3) Remove the subframe mounts by unbolting 2 bolts per mount using a 15mm socket. The Sway bar should be hanging by it’s endlinks at this point. Retain all hardware and brackets for reinstallation.
Read more
2006-2008 Chrysler 300C SRT-8 & Dodge Charger SRT-8 Exhaust System Installation
Original Exhaust System Removal
Note: With a used vehicle, we suggest a penetrating spray lubricant to be applied liberally to all exhaust fasteners and allowing a significant period of time for the chemical to lubricate the threads before attempting to disassemble.
1. Unclip and remove the ground strap shown in figure 1 located on the passenger side rear muffler.
2. Unbolt and remove the center support bar shown in figure 2 .
3. Lubricate all hangers and rubber isolators.
4. Unbolt the flange shown in figure 3 located on the driver side of vehicle just behind the front muffler assembly.
Read more
2005-06 Chrysler 300C/Dodge Magnum & Charger 5.7L HEMI (MDS) Dual Rear Exit with Single Pro-Series 3.5” Tips
Factory Exhaust System Removal:
NOTE: Penetrating spray lubricant will assist with removal.
1. Loosen the nuts and bolts at the flange connection on the driver side of the tunnel muffler using a 13mm wrench or socket.
2. Remove the driver side factory hangers from the chassis using a 13mm socket and 12” extension attached to a 3/8” ratchet.
3. Remove the driver side axle pipe hanger from the grommet shown in Fig. D using grommet pullers or a similar device. Carefully remove the rear driver side section of the stock exhaust from the vehicle.
Read more
2004-2006 Ford 5.4L 3V F-150 Truck Intercooled Supercharger System
Step-by-step instructions for installing the best in supercharger systems. INSTALLATION MANUAL Magna Charger FORD 5.4 Liter 3V Engine, 2004-2006 F-150 TRUCK
Please take a few moments to review this manual thoroughly before you begin work: A quick parts check to
make certain your kit is complete (See shipper parts list in this package). If you discover shipping damage
or shortage, please call our office immediately. Take a look at exactly what you are going to need in terms of
tools, time, and experience. Review our limited warranty with care. When unpacking the supercharger kit DO
NOT lift the supercharger assembly by the black plastic bypass actuator. This is pre-set from the factory and
can be altered if used as a lifting point!
Read more
BMW R 1200 GS SSR-01 Installation Instructions
To install the SSR, you have to remove the seat and probably the tank to be able
To route the wire to the front if you want to control the SSR by headlight.
When connecting SSR to the tail light:
Disconnect the battery after removing the seat; minus first, then positive.
Attach the SSR in the proximity of the battery with supplied adhesive strips
(Make sure the SSR is protected from water)
Read more
