94-95 Mustang GT 5.0 HO Smog System Removal
This is a ‘How To’ article to remove the smog system from a ’94-’95 SN95 5.0 HO Mustang GT and installing a delete pulley kit in its place. I tried to include everything as best as possible but take note that some of the elements may not be outlined. Use this article at your own risk. Consult your local laws regarding emissions prior to proceeding with this project. Should you require any further information in regards to this ‘How To’ see my contact info at the end of the article and I will help to the best of my knowledge.
Read more
2005 Cadillac CTS V Power Steering Pump Replacement
Identifying Power Steering Reservoir Outlet Hose At Power Steering Pump
1. Remove the front air deflector. Refer to Air Deflector Replacement – Front in Body Front End.
2. Place a drain pan under the vehicle.
3. Remove the power steering pulley. Refer to Power Steering Pulley Replacement.
4. Remove the power steering reservoir outlet hose from the power steering pump.
5. Disconnect the power steering pressure line from the power steering pump.
6. Remove the power steering cooler outlet hose from the power steering reservoir
7. Remove the power steering pump to power steering pump bracket bolts.
8. Remove the power steering pump from the power steering pump bracket.
Read more
1999 Mercedes Benz Truck ML 430 Air Injection Pump Operation
M33 AIR pump Engine 104, 111, 112, 113, 119, 137,166: When actuating, the voltage supply of the engine is performed via the air injection relay. Engine 104, 120: When actuating, the electromagnetic clutch air pump is actuated by force. Work instructions NOTE: Trim panel of cylinder head cover or air cleaner take off. Bolt (5) unscrew Refer to Air Pump NOTE: Pay attention to ground cable. 5/1 Air hose detach. M33 Read more
Chevy Big Block Long Water Pump Power Steering Bracket Installation
Assembly Instructions (photos show Chevy small block kit but assembly is the same for big block)
1. Mount the (20151-A) Power Steering Bracket & water pump to engine block using two (S275) 3/8-16 x 4.1/4” SHCS & two (TP3-1.980) spacers (between (20151-A) Power Steering Bracket & water pump) (fig. 1).
2. If your power steering pump came equipped with a mounting stud at the rear of the pump, use an 11/16” wrench to remove the mounting stud from the pump unit (fig. 2)
Read more
Self-Priming Engine Cooling Pump Model 50410-Series
This pump is designed to mount directly inside the crank-shaft pulley on Chevrolet small block (305 & 350 C.I.) engines. The maximum recommended pump speed (engine speed) is 5200 RPM. The maximum recommended discharge pressure should not exceed 10 PSI. When the pump is installed so it operates at or near maximum speed, the inlet plumbing must be designed to minimize the vacuum at the pump inlet. A high speed scoop over the inlet thru-hull fitting is recommended to reduce inlet vacuum.
Read more
2007 Ford Mustang GT “California Special”
The Mustang GT/California Special arrives in late summer as a full, stand-alone option package on the 2007 Mustang. Much like the 1968 GT/CS that offered Mustang buyers more aggressive styling that was “Inspired by the Shelby GT,” the new California Special also draws some cues from the 2007 Shelby. What’s more, it offers the kind of limited-production exclusivity that has made the original California Special such a big favorite with Mustang collectors over the years.
Read more
Small or Big Block Chevrolet Moroso Rotor & Scroll Dry Sump Oil Pump
Before installing your pump, be sure you have the proper Moroso components to go with it. Using our matched components will ensure a simple, yet professional installation.
MOUNTING
The Moroso Dry Sump Oil Pump is designed to fit either 90° V-6, small or big block Chevrolets, and the only difference is the mounting holes. You can see that there are two sets of slotted holes on the mounting bracket, which attaches the pump to the engine block.
Read more
1987 Mercedes Benz 300TD (124 Chassis) Injection Pump Removal and Installation
Procedure for remove and install injection pump, vehicle: 1987 Mercedes Benz 300TD (124 Chassis) L6-2996cc 3.0L DSL SOHC Turbo 603
Vehicle Level – Powertrain Management – Fuel Delivery and Air Induction – Diesel MFI Pump – Service and Repair – Injection Pump Removal and Installation
PRELIMINARY PROCEDURES
Remove bottom section of noise encapsulation.
Remove belt tensioning device.
Remove fan cowl and fan.
Read more
Dodge 5.9L Cummins CP3 High Pressure Fuel Injection Pump
Removing your old pump
Note: Do your best to keep all components as clean as possible.
1. Disconnect the negative battery cables from all batteries.
2. Remove the intake manifold (above injection pump) and its hose.
3. Remove the 5 ECM (Engine Control Module) mounting bolts (located on the lower left side of the engine block towards the front). Do NOT disconnect the wiring connectors from the ECM.
Read more
2005 Thalon Design Ford Mustang GT
The 2005 Mustang is very well designed and appreciated by many and serves as a homage to the old vintage designs of the first Mustangs. It therefore felt natural to build an Eleanor for the 21’st century on the body of this new Mustang.
During the winter of 2004 the design process started, first as a clay sculpt and then refined in a 3d program. Images were printed out in full scale to be used as reference for the sculpting team.
Just a few months later the car was unveiled for the first time at one of Scandinavia’s greatest car shows.
Read more
