Audi A4 TyrolSport UGSMIC Install Instructions
Please be advised the vehicle in this example is a 2001 A4. 1997-1999.5 have a different headlight arrangement and no MAP sensor. Removing the two-piece headlights on 1997-1999.5 cars is a simple process and should be self explanatory.
1. Turn the wheels all the way to one side, remove the fender liner screws. Turn the steering wheel all the way to the opposite sides and repeat.
2. Unhook the tab for the lower grill and remove. Repeat for the other side.
3. Remove the two hex bolts from the bottom of the bumper with a 6mm hex wrench.
4. Unhook the tabs for the front bumper. First, push down on the bumper, then pull outwards. This process can be frightening for a first timer, as it takes a lot of force to pull the bumper skin away from the vehicle after pushing downwards. Repeat for the other side.
Read more
Audi TT V-Flow Intake Install Instructions
Start with your Phillips head screw driver and remove the three screws on top of your battery cover. Then remove the battery cover from the car.
Firmly grasp the plug on top of your MAF sensor unplugging it. Lay the plug back away from the intake system.
Using your Phillips head screwdriver loosen the hose clamp next to the MAF housing.
You will notice a hose with a 90 degree bend and a small plastic ring around the end of it snapped into place at the bottom of the factory air box. Firmly squeeze the top and the bottom of that ring squeezing together and pull the hose off of the factory air box. Pull the hose back and tuck it back out of the work space.
Read more
2007 Audi Metroproject Quattro Concept
The Audi Metroproject Quattro, has a battery pack in visibly mounted in the boot, and lit in tranquil blue lights with a charge indicator on the side.
The supermini Audi A1 should be available with a turbocharged gas engine, turbocharged diesel engine, ranging in size from 1.2 litres to 2.0 litres. A base model with an 80 horsepower, naturally aspirated 1.4 litre engine is also expected to hit showroom floors.
Read more
2008 Audi R10 TDI Le Mans
The Audi R10 TDI remains unbeaten in the Le Mans 24 Hour race: in its third attempt, the diesel sportscar won the French endurance classic yet again. After the incredible thrill of the 76th edition of the race, Dindo Capello (Italy), Tom Kristensen (Denmark) and Allan McNish (Scotland) triumphed at the wheel of the Audi R10 TDI number 2.
Read more
2007 Audi Q7 4.2 Quattro Premium
With a host of innovative extras included as standard equipment – including Rear View Camera with Acoustic Parking – the Audi Q7 4.2 Premium model delivers superb power, efficiency, and control via a 350 hp 4.2 V8 equipped with FSI® Direct Injection technology, and combined with quattro® all-wheel drive and a 6-speed Tiptronic® transmission. More pictures below…
Read more
2008 Audi RS6 Avant
The Audi RS models from quattro GmbH are the ultimate in sportiness, complemented by powerful and elegant design, exclusive equipment and perfect quality. It has also meanwhile become a good tradition that their sports performance is combined with the high utility value of an Avant: the very first Audi RS2, which appeared in 1993, was only built as an Avant model. Although the unique Audi RS driving sensation can now be experienced in saloon, Avant and Cabriolet models – as is the case with the current RS 4 – customers especially appreciate the combination of dynamism and versatility that an Avant offers.
Read more
1998 Mercedes Benz SLK 230 L4-2.3L SC Rear Center Console Remove/Install
Removing And Installing Rear Center Console
Removing And Installing Front Center Console
AR68.20-P-2350G Remove/Install Cover on Center Console
Removing And Installing Cover On Center Console
Read more
1996-2001 Audi A4 B5 Panzer Plate Skid Plate Installation Instructions
First-time Install Procedure:
Raise car in the air: Use either ramps and wheel chocks or a jack and a pair of jack stands, or a car lift. Car must be raised on both sides for procedure to work.
Remove old belly pan:
1. Put on safety goggles. Remove old plastic belly pan if you still have one installed on your car. Save all 1/4 turn Dzus screws, if present, in provided zip-loc bag. You will not need these for the install but it’s nice to have spares.
2. Remove rear mount of belly pan, if present, with a 10mm wrench (the one with three receptacles on it.). Remove all three 1/4 turn screw (Dzus) receptacles, if present, and save them as spares in provided zip-loc bag. You might want to degrease them first
Read more
2011 Audi Q3 By Seat in Spain
Having agreed that the Q3 will be manufactured in Spain, a decision about production in the USA has been postponed. Mr. Stadler: “We will systematically explore our options in the context of the current market crisis. Audi is in a good position. There is currently no urgent need to select additional sites.”
Read more
Direction on how to install E-Open in to a BMW Z4
Please note the following:
1) This is for information ONLY; you take full responsibility for what you do. If you blow up your car, do not come yelling at me.
2) I did this install on a US spec 2005 BMW Z4. I do NOT know if it will work on BMW’s from other countries.
3) This install did NOT work because my Z4 already had an auto top down feature from BMW that is conflicting with the E-Open. In order to get this to work in my car I have to find out how to disable the internal remote top down feature. The unit was removed from my old 2003 Z4 and it worked just fine. All of the connections are the same.
The car: If your car was made 4/04 or later, you will have problems. The car already has an Auto-Top down feature.
Read more
