2000 Volkswagen New Beetle GL Timing Belt Installation
TIMING BELT for VOLKSWAGEN’ ‘1.8L 4-Cylinder – New Beetle – APH, AWP & AWV Engines Removal 1. Remove engine cover. Remove noise insulation pan from under engine compartment. 2. Remove air duct pipe between turbocharger and charge air cooler. See Fig. 1 . Air duct pipe is located along bottom right of cross member. 3. Mark rotation direction of serpentine drive belt. Move serpentine drive belt tensioner as shown to release tension on belt. See Fig. 2 . Secure tensioner using a drift, about .18″ (4.5 mm) x 2.2″ (55 mm). See Fig. 3 . Remove serpentine drive belt. Remove serpentine drive belt tensioner. 4. Rotate crankshaft so that No. 1 cylinder is at TDC of compression stroke. Read more
2007 Volkswagen New Beetle Flower-Power Party
The millionth Volkswagen New Beetle will run off the production line this summer. To mark the occasion, enthusiasts from all over Europe will meet in exactly one month’s time on the New Beetle Sunshine Tour. In addition to standard models from the New Beetle and New Beetle Cabriolet range, many custom cars with special paint finishes and completely revamped bodies will be joining the parade along the Baltic coast. It will finish with a flower-power party featuring the New Beetles at the Grömitz promenade.
Read more
2008 Volkswagen Beetle 10th Anniversary
Since 2000, it has been a fixture on our streets: the New Volkswagen Beetle . Now in 2008, the Volkswagen cult-car has been further enhanced, in the form of the New Volkswagen Beetle Anniversary Edition. New alloy wheels, sports suspension, a fresh colour as well as a special interior. Altogether, this results in an exciting limited edition that has made the appearance of the New Volkswagen Beetle even more engaging. With the Anniversary Edition we celebrate the anniversary of the international introduction of this modern interpretation of the original Volkswagen Beetle ’s iconic design in an eye catching, limited edition, packed full of value. Based upon the affordable New Volkswagen Beetle Miami, the New Volkswagen Beetle Anniversary Edition offers a visually enhanced package, from the exclusive body colour and stripe treatment, to the 17″ Versus alloy wheels and front fog lights. While the feature rich interior is dominated by the striking leatherette upholstery in a unique black and white theme and also includes front sports seats and cruise control. This exclusive version has a particular visual appearance with an exclusive Campanella white body colour contrasted by a black roof and door mirror housings. The look is completed with the distinguishing exterior stripe package. There are plenty of storage areas, such as the lockable glovebox, front door storage nets and a sunglass compartment in the headlining. Also in the centre console are the up-to-date cup holders. Additionally, there are two 12-volt outlets in the front and back.
Read more
2008 Toyota Highlander w/Smart Key TVIP V4 Remove Engine Starter (RES)
1. Vehicle Disassembly. (a) Place the Vehicle in Park and have the Parking Brake Set before disconnecting the Battery. (b) Remove the Negative Battery Cable (Fig. 1-1) (1) Protect the Fender before starting. (2) Note the Battery Cable position, as it will be re- installed in the same position. CAUTION: Do not touch the positive terminal. (c) Remove the Glove Box Under Cover. (Fig. 1-3) (1) Begin by protecting the Vehicle Interior with Blankets. (d) Remove the Passenger’s Step Cover. (Fig. 1-4) (e) Remove the Passenger’s Cowl Cover. (Fig. 1-5) (1) Remove 1 Nut. (f) Remove 2 Bolts from the Glove Box, then open the Glove Box Door. (Fig. 1-6) (g) Remove 3 Screws from the Glove Box. (Fig. 1-7) CAUTION: Sharp Metal Edges. (h) Dislodge the Glove Box. (Fig. 1-7) (i) Disconnect all Connectors from the Glove Box. (Fig. 1-8) (j) Remove the Cable Clamp from the Glove Box. (Fig. 1-8)
Read more
1996-2000 Audi A4 Short Throw Shifter Installation Instructions
This B&M Short Throw Shifter has been designed to work on most 1996-2000 Audi A4, 2000 Audi S4, 2000 Audi A6, and 1996-2000 Volkswagen Passat models. It has been engineered to greatly reduce shift throw and improve shifter feel. Check the parts and tools lists at the beginning of these instructions for the supplied parts and the tools required to install your B&M Short Throw Shifter. Installation of the B&M Short Throw Shifter can be accomplished by anyone with minimal mechanical experience.
Read more
New Beetle Relay and fuse arrangement
Relay arrangements on the relay panel – Dual Horn Relay (53) 1- Load Reduction Relay (213, 100, 18) 2 – open 3 – Fuel Pump (FP) Relay (409) 4 – Wiper/Washer Intermittent Relay (377), V Wiper/Washer Intermittent Relay (377), VI Fuse placements on the relay panel A- Fuse for power windows (red connector) B- open C – Fuse for heated power seats (black connector)
Read more
1999 Volkswagen New Beetle GL Timing Belt Removal & Installation
Application for VOLKSWAGEN 2.0L 4-Cylinder – AEG, AVH, AZG, BDC & BEV Engines For 1998-00 model years, although the manufacturer does not recommend a specific scheduled maintenance interval, belt manufacturers suggest the belt be replaced at 60,000 mile intervals. For 2001-03 model years, the manufacturer recommends the belt be replaced at 105,000 mile intervals. NOTE: For 2004, manufacturer does not provide a timing belt replacement interval.
Read more
1992 Dodge Colt Remove/Install/Overhaul
Removal, overhaul and installation procedures are covered in this article. If component removal and installation is primarily an unbolt and bolt-on procedure, only a torque specification may be furnished.
FUEL PUMP
Removal & Installation
1) Fuel pump assembly is located inside fuel tank. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE. Raise vehicle on hoist. Drain fuel into suitable container. Disconnect electrical connectors and fuel hoses at fuel tank.
2) Remove fuel filler hose from fuel tank. Remove nuts securing fuel tank. Remove fuel tank from vehicle, and remove fuel pump assembly. To install, reverse removal procedure. Tighten nuts to specification. See TORQUE SPECIFICATIONS table at end of article.
Read more
1999 Mercedes Benz Truck ML 430 AR68.10-P-1000GH Remove/Install Instrument Panel
Removing And Installing Instrument Panel
Remove/Install
1 Remove instrument panel bottom section (1()
2 Remove A-pillar trim on left and right
3 Remove upper section of air outlet panel (1) Long wedge: See Special Tools below.
4 Unscrew screws (3) from upper side of instrument panel
5 Remove instrument cluster (A1 remove
6.1 Disconnect sun sensor connector
NOTE: Only as of 01.09.01: Connector is located behind instrument cluster
Read more
1998 Mercedes Benz SLK 230 L4-2.3L SC Rear Center Console Remove/Install
Removing And Installing Rear Center Console
Removing And Installing Front Center Console
AR68.20-P-2350G Remove/Install Cover on Center Console
Removing And Installing Cover On Center Console
Read more
