1987 Mercedes Benz 300TD (124 Chassis) Fuel Injection Pump Timing Test
Vehicle application: 1987 Mercedes Benz 300TD (124 Chassis) L6-2996cc 3.0L DSL SOHC Turbo 603
Vehicle Level – Powertrain Management – Computers and Control Systems Testing and Inspection – Related Diagnostic Procedures- Fuel Injection Pump Timing Test (DE-04.07)
This test is divided into the following sections
A. Static RIV Method
B. Dynamic RIV Method
Read more
1984-1995 Honda Accord/Prelude InTank Fuel Pump
TEST 1. Turn the ignition OFF. 2. On the Accord, remove the screws securing the underdash fuse box to its mount. Remove the fuel cut‐off relay from the back of the fuse block and turn the block so you can see the relay mount. Use a jumper wire to connect the two left‐most terminals of the relay mount (terminal 1 to terminal 2). 3. On Preludes, remove the dashboard under cover; remove the fuel cut‐off relay from the fuse block. Use a jumper wire to connect the top 2 terminals (terminals 1 and 2) of the relay mount. 4. Disconnect the fuel line at the Read more
New Beetle Relay and fuse arrangement
Relay arrangements on the relay panel – Dual Horn Relay (53) 1- Load Reduction Relay (213, 100, 18) 2 – open 3 – Fuel Pump (FP) Relay (409) 4 – Wiper/Washer Intermittent Relay (377), V Wiper/Washer Intermittent Relay (377), VI Fuse placements on the relay panel A- Fuse for power windows (red connector) B- open C – Fuse for heated power seats (black connector)
Read more
1999 Mercedes Benz Truck ML 430 Air Injection Pump Operation
M33 AIR pump Engine 104, 111, 112, 113, 119, 137,166: When actuating, the voltage supply of the engine is performed via the air injection relay. Engine 104, 120: When actuating, the electromagnetic clutch air pump is actuated by force. Work instructions NOTE: Trim panel of cylinder head cover or air cleaner take off. Bolt (5) unscrew Refer to Air Pump NOTE: Pay attention to ground cable. 5/1 Air hose detach. M33 Read more
Dodge 5.9L Cummins CP3 High Pressure Fuel Injection Pump
Removing your old pump
Note: Do your best to keep all components as clean as possible.
1. Disconnect the negative battery cables from all batteries.
2. Remove the intake manifold (above injection pump) and its hose.
3. Remove the 5 ECM (Engine Control Module) mounting bolts (located on the lower left side of the engine block towards the front). Do NOT disconnect the wiring connectors from the ECM.
Read more
Honda GL1500 GoldWing Fuel Pump Replacement
This article describes replacing a stock fuel pump with an unapproved aftermarket replacement. If you attempt this procedure, you do so at your own risk. You will be dealing with electricity and flammable liquids. Explosion, burns and death are possible outcomes of attempting this procedure. You are fully responsible for all results. OK, now that we have that out of the way . . . Has your GL1500 died under conditions of hot ambient temperatures and high load and then mysteriously restarted and ran fine after it cooled down? You may be experiencing a weak fuel pump.
Read more
1992 Volvo 940 LH-2.4 Fuel Injection System Wiring Diagram
Component / Connector Locations
LEGEND 1/1 Battery 2/8 Overdrive relay 2/11 Relay, electric cooling fan 2/12 Relay, radio interference suppression 2/13 Relay, fuel Injection 3/1 Ignition lock 3/50 Throttle switch 4/6 Control unit, ECC 4/10 Control unit, ignition system EZ-K 4/15 Power stage, ignition system EZ-K 4/23 Control unit LH-jetronic 2.4 5/1 Combined instrument 4/40 Climate control MCC 6/25 Starter motor 6/31 Fuel pump 6/33 Fuel level sensor/primer Read more
1994 Volvo 850 L5-2.4L AW 50-42 Automatic Transmission Wiring
Component Location Component I.D. List No. Component Name 1/1 Battery 2/1 Main headlight relay with bulb malfunction indicator 2/3 Regulator, DIM-DIP 2/4 Windshield wiper intermittent relay 2/5 Seatbelt reminder/key warning relay 2/7 Central lock/delayed courtesy lighting relay 2/11 Engine cooling tan relay 2/15 Relay, exhaust temperature sensor 2/16 Tailgate wiper intermittent relay 2/22 A/C relay 2/23 Fuel pump relay 2/24 Fan relay, max. 2/28 Alarm relay 2/30 Overload relay X+ 2/31 Overload relay 15+ 2/32 Main relay fuel system 2/42 Combination relay Read more
BMW iBus Relay Unit Installation Manual
What this unit actually does?
This unit helps you to switch on or off devices, control signals and so on…
How it works?
Unit has three single pole double throw relays with terminal-type connectors: one input and two outputs (normally-opened and normally-closed). By pressing programmed button on steering wheel or board monitor, corresponding relay will be triggered and as result your device will be switched on or off (or some signal controlled).
Is my car compatible with the iBus Relay Unit?
Read more
1989 Volkswagen Cabriolet L4-1781cc Powertrain Management System Diagram
Description: 2-way idle speed boost valve Alternator Auxiliary air regulator Battery Cold start enrichment relay Cold start enrichment vacuum switch Cold start valve Control pressure regulator Fuel enrichment switch Fuel gauge sending unit Fuel injection power supply relay Fuel pump Fuel pump relay Hall generator Hot pulse relay Idle boost control unit Ignition coil Ignition control unit Ignition distributor OXS control unit OXS frequency valve OXS thermoswitch Oxygen sensor Spark plug connectors Spark plugs Starter Thermo time switch Transfer fuel pump Voltage Read more
