2007 Chrysler Town & Country Black Jack
The Chrysler Town & Country Black Jack draws its inspiration from the Luxor Hotel in Las Vegas – a dominant and enigmatic presence on the Strip. Massive, dark and simple in shape and design, the icon casts a shadow over the surrounding properties.
It sits on custom one-off 20-in. wheels with new bright finishes built by Alcoa Forged. They are tucked around a set of Brembo SRT brakes, matched with an adjusted ride height. Its stance is sophisticated, yet approachable. Covered in a custom Amber-Black Pearl paint, the hood features a ghosted “Black Jack” logo and pin stripe provided by Jim-Tech. Chrome accents complement the billet-style grill.
Read more
2008 Ford Super Duty F-250/350/450/550 Mount Kit Installation Instructions
Contents of this ford super duty mount kit instruction
Attach:
1. Push Pin Release Handle down to pull out Connecting Pins.
2. Drive vehicle slowly to engage Pushplates into Attachment Arms.
3. Stand in front of blade. Fully raise Pin Release Handle to release Connecting Pins.
4. Push Headgear toward vehicle to allow Connecting Pins to fully engage Pushplates. If unable to push Headgear from in front of blade, stand in front of Headgear on driver side and push Headlamp Bracket.
5. Pull out Jack Lock. Push Pin Release Handle into Stop.
Read more
2010 Chevy Camaro Sport Sway Bar Kit 22109 Installation
Front Sway Bar Installation
Raise the Vehicle
Raise front of the vehicle using a floor jack and place jack stands in the proper jacking points. Securely block the rear wheels of the vehicle
Remove the Driver Side Front Wheel
The front bar will sneak it’s way out towards the driver side. Remove the driver side front wheel to gain more clearance for installation.
Disconnect the Front End Links
Disconnect the front end links from the sway bar ends on each side.
Detach the Sway Bar Bushing Brackets
Just above the front subframe, the sway bar is attached by 2 bushing brackets, one on each side. Undo the 2 nuts per bracket to detach the Read more
1955-1957 Chevrolet Custom 3-Point Seatbelt Installation Guide
The information enclosed in this installation guide is to be used as merely an outline to assist you during the process of installation. This guide does not cover every installation possibility, vehicle, or every aspect of the installation process.
Note, the installation hardware above has been put together to cover as many variations of the ‘55-’57 Chevy as possible. In many instances if your vehicle has existing anchor points installed you may not need some of this hardware, please look over the installation guide for your type of vehicle, feel free to contact us for any questions you have.
Read more
Cadillac CTS-V Rear Suspension Snubber Installation Manual
Step 1. Jacking & Support of Car
Note: If you are using an automotive lift, parts a & b may be skipped.
a). To raise the front of the car, (depending on the jack you use) you may need to initially raise the car from the side (using the secondary jack) to gain clearance for the hydraulic jack at the front of the car. Once this is done, support the car with the jack stands located on the frames cross member as shown in Figure 1.
b). With the front of the car supported, now raise the rear of the car. This is done with the jack positioned from the side of the car. The jacking point will be the rear axle or differential housing. Once the rear of the car is in the air, supoport it with the other two jack stands, on the car’s subframe as shown in Figure 2 and Figure 3. You may wish to place a block of wood between the jack stand and subframe to avoid any scatches.
Read more
GM Lockpick Gen 4 Installation Instructions
After installation, the GEN 4 will allow continuous operation of the AUX input video features of your navigation screen (vehicle must have a VIDEO AUX input jack in the console – small audio jack in front of screen is not a video AUX input), and if your screen is capable of playing DVD movies, the GM LOCKPICK will allow continuous operation of the DVD player when selected. If you do not have an AUX input jack for video or DVD play capability, the GM LOCKPICK is equipped with a video input enabled by simple switch settings. (See below for video input programming requirements)
Read more
1998 Audi A6 Body Repairs
Vehicle identification data
Type plate and vehicle identification number
The type plate -A- is located at the rear bulkhead of the engine compartment behind the coolant reservoir.
Vehicles for certain export countries have no type plate.
The vehicle identification number -B- (chassis number) is stamped on the rear bulkhead in the engine compartment.
Vehicle data sticker
The vehicle data sticker is located in the spare wheel well at the rear of the vehicle.
Read more
GM 5 Unlock Installation Possibilities
GM UnLOCK GM 5. After installation, the GM 5 will allow continuous operation of the AUX input video features of your navigation screen (vehicle must have a VIDEO AUX input jack in the console – small audio jack in front of screen is not a video AUX input), and if your screen is capable of playing DVD movies, the GM 5 UnLOCK will allow continuous operation of the DVD player when selected.
The GM 5 is equipped with a video input that you can use for a rear camera input, a front camera input or both. The video input can also be used for displaying the picture from your iPOD, video game, computer or external DVD player. (See below for video input programming requirements) The GM 5 UnLOCK will also allow the user to unblock on command, navigation features locked when in motion and various functions locked in XM and CD player modes. This includes address entry and points of interest searching, along with radio controls for XM category, CD folders etc., all which are blocked while in motion.
Read more
Audi/VW B5 1.8T stėrn Transmission Mount Installation
This mount will provide a great reduction in transmission movement making shifting much more secure. With less transmission movement you’ll have less drivetrain slop as well, resulting in more power transmitted to the wheels. Upgraded engine mounts are recommended to be used in conjunction. Below are our installation guidelines for this item. Please review them carefully before attempting to install this product.
Read more
GRIP Chevy Cobalt Body Kit Installation
All GRIP body kits need to be properly sanded and primed before painting, even if the part arrives pre-primed. Failure to properly prepare parts before painting can result in poor paint finish and adhesion. Please prefit parts before painting! Once a part has been painted or modified in any way it cannot be returned.
1: Look over vehicle before installing the body kit to make note of all attachment points on existing fascia. Since GRIP uses all existing attachment points, it is very important not to harm existing mounting holes and / or fasteners. Some fasteners that are drilled out cannot be reused. It is very important to use special care when removing the reusable fasteners from the panels since they will not be provided by GRIP. GRIP only provides non-reusable fasteners with its kits.
Read more
