Cadillac Escalade & EXT/ESV Liquid Grille 94215 Harley-Davidson Road King Instalation
A. Pre-installation Preparation
1. Verify kit contents.
2. Remove protective wrapping from inserts and place on a non-abrasive surface.
3. Remove the brackets and hardware from the box.
Read more
Putco Chrome Mesh Grille Insert Installation Sheet
Grille Pre-installation Preparation
Step 1: Locate the weld-in brackets on the back of the CHROMED MESH GRILLE INSERT(S). These brackets can be found around the aluminum perimeter of the grille insert.
Step 2: Place the Black spring clips found in your installation hardware kit on each of the weld-in brackets located on the Read more
2005-Present Pontiac G6 Figure Grille Set Installation Instructions
These grilles are fabricated employing quality materials and finishes, and have been engineered to enhance the look of your vehicle for the duration of its life. Proper installation is essential to your overall satisfaction, so please read these instructions before attempting to install the grilles. Exercise patience; these instructions are intended to assist even the most mechanically challenged.
Read more
2005-Up Pontiac G6 Figure Grille Set Installation Manual
These grilles are fabricated employing quality materials and finishes, and have been engineered to enhance the look of your vehicle for the duration of its life. Proper installation is essential to your overall satisfaction, so please read these instructions before attempting to install the grilles. Exercise patience; these instructions are intended to assist even the most mechanically challenged.
Read more
07 Honda CR-V Grille Guard Installation Instructions
Installation procedure the grille guard on Honda CR-V
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY.
2. Using a flat screwdriver carefully remove all fasteners from factory plastic shroud on top and underneath the vehicle. On the bottom there are (4) on the front and (3) on each side by the fender. On the top there are (7) fasteners.
3. Remove bottom plastic shroud and place it on a working area. Using a hack saw carefully cut the marked area shown in Figure 1.
Read more
2007 Mercedes A Class Anniversary Edition
Exactly ten years after the successful A-Class was first presented in 1997, Mercedes-Benz is celebrating the anniversary of this compact car with the exclusive “Edition 10″ special model. With a customer cost advantage for the equipment of up to 30 percent, and in addition to the extensive standard appointments, this anniversary edition includes sporty 16-inch light-alloy wheels, a perforated radiator grille and a louvred panoramic sunroof. The sporty, elegant atmosphere in the stylish interior is enhanced with high-grade leather and brushed aluminium. This superbly equipped editions of the A-Class can be ordered with immediate effect.
Read more
2003-04 Cadillac CTS Upper Grille Installation Instructions
Step 1: Remove factory grille shell. First, remove the four plastic screws located on top of the shell (two in the front & two on top). Then remove the four plastic screws located on the bottom (directly behind the grille shell). The bottom screws are much harder to remove as you have limited access to them. You can snap them out which will render them useless for future use, or you can take your time and slowly work (shimmy) them out using a flat head screwdriver.
Note: If you intend to install the grille shell back on to the vehicle you will need the plastic screws to do so. If they are broken when removing the factory shell you will need to purchase new plastic screws from the dealership.
Step 2: Tape over the grille opening to protect finish (see figure 1 & 2). Next, using the necessary cutting tool (die grinder, air/pneumatic saw, jigsaw) carefully cut the plastic guides from the grille (see figures 2, 3 & 4). Do not cut into the exposed portion of the front end.
Step3: Now file down rough spots until smooth (see figures 5 & 6). Once finished you will have a nice smooth surface, which will allow the billet grille to rest unobstructed in the freshly trimmed opening (see figure 7).
Step 4: Fit the grille insert into the trimmed opening, attach the two extension brackets to the top two brackets (left & right) using the 10-24 x 1” cap screws and k-lock nuts provided, then attach the two bottom extension brackets using the 10-24 x 1” cap screws and k-lock nuts. Before tightening be sure that you have the proper distance needed for a precise fit.
2007 Jeep Wrangler Adds Mopar Chrome Grille
Mopar, the Chrysler LLC’s original equipment parts manufacturer, announced it offers a new Chrome Grille for the Jeep Wrangler and Jeep Wrangler Unlimited. An Authentic Jeep Accessory from Mopar, the chrome grille kit also includes a Jeep emblem, hood seal and fasteners.Installing in less than 20 minutes, the chrome grille has a durable and long-lasting finish. Designed and engineered to meet all Chrysler O.E. corrosion protection specifications and standards, the chrome grille also doesn’t affect the Wrangler’s cooling system performance.
Read more
2008 Mercedes-Benz C-Class Estate
The estate takes the trademark strengths of the saloon, such as safety, agility and comfort, and combines them with a significant increase in spaciousness and versatility. Quite apart from being able to hold a maximum of 1500 litres, giving it a larger load capacity than any other premium-class estate in this market segment, the new C-Class Estate also offers a host of handy features for easy loading and safe transportation -a tailgate which opens and closes automatically at the push of a button, for example. Compared to the outgoing model, the new Mercedes estate burns as much as twelve per cent less fuel. With an official NEDC consumption of 6.0 litres/100 km, the new C 200 CDI can make a single tank of fuel (66 litres) last for over 1000 kilometres. Just like the saloon, the estate version of the new C-Class has also been awarded an Environmental Certificate, which attests to the environmentally oriented development process as conforming with the international ISO standard. In terms of safety, the new estate blazes a trail with innovations of the likes of PRE-SAFE® and the Intelligent Light System, and distinguishes itself as the safest car in this vehicle class. Seven airbags, belt tensioners and belt force limiters, as well as crash-responsive NECK-PRO head restraints all make up part of the standard specification.
Read more
2007 Mercedes-Benz CL Class
The luxury Coupé raises the bar in terms of vehicle safety with the PRE-SAFE® brakes: the unique system automatically brakes the Coupé before an imminent rear-end collision. Furthermore, Mercedes innovations such as the Active Body Control (ABC) suspension system, the Intelligent Light System with five lighting functions and PRE-SAFE® anticipatory occupant protection all come as standard. Two powerful engines with 8 or 12 cylinders are available, delivering a notable increase in output and torque. Thanks to their exemplary smoothness they also live up to the Mercedes heritage of superb motoring refinement.
Read more
