2008 Volkswagen Passat R36
The new Passat R36, available in either saloon or estate bodystyles, is equipped with a naturally-aspirated 3.6-litre V6 engine developing 300 PS and 258 lbs ft of torque. Drive is channelled via a six-speed DSG gearbox through a 4MOTION all-wheel drive system capable of diverting torque to either axle depending on the grip available. As a result the saloon is capable of accelerating from rest to 62 mph in 5.6 seconds while the estate takes 5.8 seconds. Both models have limiters in place to restrict the top speed to 155 mph.
Read more
2008 Volkswagen Passat TSI EcoFuel Natural Gas Concept
The Passat Estate TSI EcoFuel is powered by a 1.4-litre TSI 150 PS engine running on either natural gas or petrol. The engine features both a supercharger and a turbocharger operating sequentially to provide relatively high power outputs from a small capacity engine. In order to allow the engine to cope with the additional loading encountered through the burning of natural gas rather than gasoline, significant changes are made. The valves, piston rings and the pistons themselves are all uprated to cope while the turbocharger has also been replaced with a smaller unit. Controlling the switch between conventional fuel and natural gas is a new engine management computer.
Read more
2003-04 Cadillac CTS Upper Grille Installation Instructions
Step 1: Remove factory grille shell. First, remove the four plastic screws located on top of the shell (two in the front & two on top). Then remove the four plastic screws located on the bottom (directly behind the grille shell). The bottom screws are much harder to remove as you have limited access to them. You can snap them out which will render them useless for future use, or you can take your time and slowly work (shimmy) them out using a flat head screwdriver.
Note: If you intend to install the grille shell back on to the vehicle you will need the plastic screws to do so. If they are broken when removing the factory shell you will need to purchase new plastic screws from the dealership.
Step 2: Tape over the grille opening to protect finish (see figure 1 & 2). Next, using the necessary cutting tool (die grinder, air/pneumatic saw, jigsaw) carefully cut the plastic guides from the grille (see figures 2, 3 & 4). Do not cut into the exposed portion of the front end.
Step3: Now file down rough spots until smooth (see figures 5 & 6). Once finished you will have a nice smooth surface, which will allow the billet grille to rest unobstructed in the freshly trimmed opening (see figure 7).
Step 4: Fit the grille insert into the trimmed opening, attach the two extension brackets to the top two brackets (left & right) using the 10-24 x 1” cap screws and k-lock nuts provided, then attach the two bottom extension brackets using the 10-24 x 1” cap screws and k-lock nuts. Before tightening be sure that you have the proper distance needed for a precise fit.
2008 Volkswagen Passat Adds Park Assist
There is something decidedly fantastical about this scene: We observe the approach of a Passat estate, it stops, the driver gets out, slams the door shut and, as he walks away from the car, he aims a remote control back at it. That car now proceeds to reverse park itself into the available space, it then independently cuts the engine and activates the door locks. End of performance. In reality, there is nothing at all fantastical about this demonstration. The live performance by Volkswagen can be viewed at this year’s Hanover Fair (21 to 25 April), where the carmaker is premiering its “Park Assist Vision”, a system with the ability to guide a Passat prototype with absolute precision into a perpendicular parking space, i.e. the kind available on parking lots and in underground car parks. These parking spaces are often too narrow to allow drivers and passengers to get in and out of the car comfortably. In the not too distant future, “Park Assist Vision” will put an end to that.
Read more
2008 Volkswagen Passat Estate TSI EcoFuel
The first-generation Scirocco made its public debut at Geneva 34 years ago. Now Volkswagen is pleased to announce the comeback of its legendary two-door sports coupé. Beneath striking new styling lies the most dynamic and technologically advanced production hatchback Volkswagen has ever built. At UK launch in September this year, the Scirocco will be available with a 2.0-litre T-FSI petrol unit producing 200 PS, with prices starting at around £20,000.
Read more
2007 Volkswagen Passat DARPA
Autonomous driving is an important topic for Volkswagen Research. The last decade has seen several driver assistance systems come to market that improve the handling in dynamic driving situations. Driver assistance systems such as Electronic Stability control, Electronic Parking Assistance and Adaptive Cruise Control have all been designed and implemented to make the task of driving safer, easier, and more enjoyable.
Read more
2005-Up Pontiac G6 Figure Grille Set Installation Manual
These grilles are fabricated employing quality materials and finishes, and have been engineered to enhance the look of your vehicle for the duration of its life. Proper installation is essential to your overall satisfaction, so please read these instructions before attempting to install the grilles. Exercise patience; these instructions are intended to assist even the most mechanically challenged.
Read more
1993 Ford Explorer Suspension Front (2WD) Removal & Installation
The first step of removal the spindle from this ford explorer
Removal 1. Raise and support front of vehicle. Remove wheel and tire assembly. Remove brake caliper from rotor and wire it to under-body to prevent damage to brake hose. 2. Remove dust cap, cotter pin, nut retainer, nut, washer and outer bearing. Remove rotor from spindle. Remove inner bearing and seal. Discard seal. Remove brake dust shield. 3. Remove tie rod end from spindle arm with Tie Rod End Remover (Tool-3290-D). Remove cotter pin from lower ball joint stud. Remove axle clamp bolt from axle. Note position of camber adjuster on top of axle. 4. Using Ball Joint Remover (D81T-3010-B), remove camber adjuster from upper ball joint stud and axle. Strike inside area of axle to release lower ball joint. See Fig. 4 . Remove spindle and ball joint assembly from axle.
CAUTION: DO NOT use pickle fork to separate ball joint. This will damage the seal and ball joint socket.
Read more
Putco Chrome Mesh Grille Insert Installation Sheet
Grille Pre-installation Preparation
Step 1: Locate the weld-in brackets on the back of the CHROMED MESH GRILLE INSERT(S). These brackets can be found around the aluminum perimeter of the grille insert.
Step 2: Place the Black spring clips found in your installation hardware kit on each of the weld-in brackets located on the Read more
Disabling Daytime Running Lights (DRL) for VW Passat
A wiring diagram of the headlights for the 2001.5 VW Passat (may or may not apply to other model years). First method: Pulling out DRL relay 173 The fuse panel with cover. The driver side door has to be open. Remove the fuse panel cover. Start by prying through the notch shown above. These were done on a 2001.5 Volkswagen Passat 1.8T. It may also apply to other model years and trims. Look inside behind the fuse panel. You’ll see the relay panel and relay 173. A closer look at relay 173 installed. Pull relay 173 out to disable the daytime running lights.
Second method: Modifying the light switch The pin connectors at the back of the light switch.
Read more
