2004 Chevy Silverado 1500 AMSOIL BMK-13 Installation
Rough measurements revealed the engine compartment of this 2004 Silverado was just too cramped to cleanly fit the BMK- 13 filter mount with EaO-15 and EaBP-90 Filters. I located a suitable vertical underbody “lip”, inside the frame on the dri- ver’s side, back by the ABS EBCM/Hydraulic manifold (see photos). Before ordering the kit I pre-measured, and figured about a five-foot hose run from the spin-on filter adaptor to the chosen filter mount location and ordered extra hose. I used a BK-11 90-degree fitting kit for the hose to spin-on filter adaptor connection (see photos). I ended up using about 4′ 8″ of hose for each line, so eight feet might do the job with a little tighter routing.
Read more
2007 Chevrolet Silverado HD Crew Z71
Taking cues from Dale Earnhardt Jr.’s “Big Red” Silverado that debuted at SEMA in 2006, the ‘08 Silverado HD Crew Z71 Big Red demonstrates how that expressive concept’s unique features would look with production-type components. It combines numerous GM Accessories inspired by Earnhardt’s Big Red and features additional custom touches. It also supposes the popular Z71 off-road package on the Silverado 2500HD – a model not offered by the factory. It’s powered by the 6.6L Duramax turbo-diesel V-8 and a six-speed Allison transmission.
Read more
2007 Chevrolet Silverado All American Baseball Edition
The only thing missing from this home-run Silverado is the apple pie – because the baseball and Chevrolet are covered. The Silverado 1500 crew cab is decked out in a baseball theme – with a paint scheme that incorporates all major league team logos – to support Chevrolet’s ties to Major League Baseball. It is also a fan’s dream, with a power-lifting tonneau cover that rises to reveal a wide-screen television monitor that not only brings in the game, but is connected to a Wii gaming console . Inside, the Silverado features real baseball bat ash wood trim and uniquely trimmed leather seats that have the look and feel of a baseball – including the stitching.
Read more
2005-06 HONDA CRV Grill/ Brush Guard Part #6049
Procedure installing the Grill to Honda CRV
1. Remove the plastic rivets securing the plastic guard located underneath the vehicle in order to install the front bar.
2. Start with the passenger side assembly, postion one of the 7/16 nut plates behind the cross member opening and align the 7/16 nut plate wit the two matching holes in the frame rail. Fasten the frame brackets to the bottom cross member as shown in the illustration using the 7/16 x 1 ¼ hex bolts, 7/16 washers, 5/16 self tapping bolt and 5/16 washers. Note: Do not over tighten 5/16 x 1 self tapping bolt as it might strip threads.
Read more
2007 Chevrolet Silverado HD 3500 Crew
The spirit of the country music culture is infused in this rolling sound stage, which has been used at the Country Music Festival and other country music artist venues. The bed and tonneau cover of the Silverado 3500HD crew cab open to reveal a makeshift stage, complete with lighting and power for microphones and amplifiers. A music-inspired graphics package and unique wheels dress up the exterior, while the interior has saddle-like aniline leather trim that is complemented by real wood accents and guitar-style mother-of-pearl inlays.
Read more
2008 Chevrolet Silverado 2500HD & 3500HD
Chevrolet Silverado introduced all-new heavy-duty pickups during the ’07 model year. They were highlighted by all-new and differentiated exterior designs, two unique interiors and class-leading power and efficiency. They roll into 2008 ready for work or leisure, with minor refinements and enhancements, while still loaded with include segment-leading and segment-exclusive features.
Read more
99-05 Chevy Silverado AirBar ABAR11007 Installation
1. Raise truck to a comfortable working height and support safely with jackstands under the frame. Place these stands ahead of the leafspring mount and at the rear of the frame to support it when the C notch is installed.
2. The C notch frame section will be installed first. Note that the front edge of the C notch is butted up to the round tube crossmember. Place the C notch against the framerail to scribe the outline for cutting the framerail. Be sure to “round” the corners of the cut to avoid any stress points This is the layout for cutting the frame for the C notch. Using a 1/2” drill to make the corners produces a rounded corner which is much less susceptible to a stress crack.
Read more
2007-2010 Chevrolet Silverado 1500 Poweraid Spacer Installation
1. Disconnect the negative battery cable! Lift up on the front of the and beauty cover and remove it from the vehicle. Push down on the radiator hose, and separate the tube from the plastic clamp.
2. Disconnect the breather tube from the intake tube, by gently pulling towards you. An O-ring is all that holds it in place. Next loosen the hose clamp on the intake tube at the throttle body, and at the Mass Air Sensor, and remove the tube from the vehicle.
3. With a 10mm socket remove the two nuts, and the two bolts that hold the throttle body to the intake manifold. Without disconnecting the wiring harness, set the throttle body aside.
Read more
2010 Chevy Camaro Sport Sway Bar Kit 22109 Installation
Front Sway Bar Installation
Raise the Vehicle
Raise front of the vehicle using a floor jack and place jack stands in the proper jacking points. Securely block the rear wheels of the vehicle
Remove the Driver Side Front Wheel
The front bar will sneak it’s way out towards the driver side. Remove the driver side front wheel to gain more clearance for installation.
Disconnect the Front End Links
Disconnect the front end links from the sway bar ends on each side.
Detach the Sway Bar Bushing Brackets
Just above the front subframe, the sway bar is attached by 2 bushing brackets, one on each side. Undo the 2 nuts per bracket to detach the Read more
Chevy Silverado 1999-2005 Signal Mirror Installation Instructions
Mirror Housing Removal
1. Open driver side door. Lower window.
2. Remove door lock cover.
3. Unsnap and remove the triangular molding that covers the mirror mounting screws.
4. Unsnap and remove the molding that covers the door handle. Remove the screw behind the door handle.
5. Unsnap the control console and unplug the wires. Remove the screw located behind the arm rest.
6. Dislodge the door panel by pulling it up and away from the door slightly. Disconnect light and tweeter connections and remove door panel.
Read more
