07-Up Chevy Tahoe LED Upper Quarter Panel Light
Your new IPCW LED Upper Quarter Panel Lights are quality-made products that will work beautifully on your vehicle. Please refer to the pictures below for installation instructions.
Remove the screws in Figure A with a Phillips screwdriver. Untwist the sockets, then gently slide out the tail light.
After the tail light is removed. remove the screw in Figure B.
Remove the screw in Figure C to remove the Upper Quarter panel.
Gently slide out the stock Upper Quarter Panel.
Read more
1941-48 Chevrolet Style Tail Lights Installation Instructions
1. Disconnect Battery. Do not skip this step. Also, do not try to “test” the LED array by connecting the leads directly to your battery. Permanent damage will occur to the LED array if you fail to heed these steps.
2. Choose a suitable location to mount the taillight.
3. Using the supplied template, mark the centers of the three holes required for installation.
4. Drill two (2) 1/4” holes for the mounting studs and one (1) 3/8” hole for the wiring.
Read more
Audi TT Coupe (U.S. Version) Fog Light Modification for Daytime Running Light Operation
The U.S. Version of the Audi TT Coupe (and Roadster) does not come factory equipped with daytime running light capability. Daytime running lights being headlamps or similar, smaller lamps that are on whenever the ignition of the car is on. These lamps then also remain on when the parking lights and the headlights are turned on. I feel daytime running lights add to the safety level and overall appearance of any car. You’re more visible to pedestrians and other motorists and the car looks better in the frontal view. So, the challenge was to determine the best way to add daytime running lights to the TT Coupe. Since the TT is equipped with fog lights that are built in to the headlight cluster the plan was to try to modify the circuitry controlling the fog lights to make them behave like daytime running lights. However, I also needed to retain the normal on/off fog light operation during use of the headlights.
Read more
Service Light Plus Airbag Reset Tool (10 in 1) Instruction Manual
This Service Light & Airbag Reset Tool is an essential tool for resetting of oil service light, service warning light, service mileage, service intervals and airbag on European made vehicles like AUDI, BMW, CITROEN, M. BENZ,MINI, SAAB, SEAT, SKODA,VOLKSWAGEN, VOLVO, etc. It is light, compact and very convenient without using the OEM Scanner to do the job. Once hooked up to the vehicle Data Link Connector (DLC), it can perform the following functions:
Read more
Malfunction Indicator Lamp/Check Engine Light
If this indicator comes on while driving, there is a problem with your engine or its emission control systems. Even though you may feel no difference in your car’s performance, it can reduce your fuel economy and cause your car to put out excessive emissions. Continued operation may cause serious engine damage.
Read more
Turn off your Check Engine light
So your Check Engine light is on, staring at you every day. You know there must be something wrong, but you don’t want to pay to have the problem diagnosed. Don’t worry – we’ve got you covered. With a simple code-reader tool, you can find out what’s wrong and turn the light off. When the Check Engine light is on, it means one or more trouble codes are stored in your vehicle’s computer. Trouble codes tell you that a problem was identified in the engine- management system. Reading the stored trouble codes is the first step in diagnosing the problem.
Code readers are inexpensive and simple to use
Read more
Ford Trunk Light Kit Installation
Installing a trunk light kit on a Ford Crown Victoria or Chevrolet Impala requires different installation instructions for different model years. Please use the instructions that pertain to your make and model of vehicle.
1998 and 1999 Ford Crown Victoria
Use the “Ford Trunk Light Kit ETLK01xx” Installation Instructions.
Read more
2009 Volkswagen Jetta TDI SportWagon Diesel
Powered by the 2.0L Clean Diesel TDI, delivering 140 horsepower and 235 ft.-lbs. of torque, the new Jetta SportWagen does not conform to old station wagon stereotypes. Using readily available body components and finished in custom paint and graphics, this Jetta TDI SportWagen demonstrates what can be done to personalize a Jetta. To reinforce the sportin this wagon, the Jetta’s underpinnings were upgraded by H&R Springs to lower its ride height, and make its handling razor sharp.
The Jetta TDI SportWagen remains firmly planted with 19 inch Sportec Wheels and Yokohama Tires wrapped around an upgraded Brembo brake kit, providing high performance stopping power. Hella provides up-level lighting components that add a unique flair to the styling.
2003 Nissan 350z Tire Pressure Monitor System (TPMS) Warning Light Flashes Or Stays On
If the TPMS Warning Light (see Figure 1) flashes or stays ON, please use the “TPMS Diagnostic Chart” (page 2) to resolve the incident. NOTE: If more than one wheel transmitter is NOT activated, the blinking patterns for those wheels will combine. (Example: one blink/OFF/three blinks = LF and RR transmitters are not activated.)
CAUTION (for Pathfinder & Murano ONLY):
• Do NOT remove the Long Term Storage Fuse with the ignition key in the ON position.
• If the storage fuse is removed with the ignition key ON, the Wheel Transmitter (“Wake Up”) Activation procedure must be done.
Read more
BMW E39 Euro-spec CELIS Angel Eye Head Light Installation
This DIY covers the install of Euro-spec CELIS (aka Angel Eye or halo) assemblies on a pre-2001 E39 to mimic the newer-style 2001+ E39 head lights. Note that the Euro-spec assemblies do not have the small side parking indicator, which is required for DOT-approval.
Recommended Parts:
Philips Ultinon 6000K Xenon HID bulbs (D2S)
Philips PY21W SilverVision bulbs
Read more
