Dodge 5.9L Cummins CP3 High Pressure Fuel Injection Pump
Removing your old pump
Note: Do your best to keep all components as clean as possible.
1. Disconnect the negative battery cables from all batteries.
2. Remove the intake manifold (above injection pump) and its hose.
3. Remove the 5 ECM (Engine Control Module) mounting bolts (located on the lower left side of the engine block towards the front). Do NOT disconnect the wiring connectors from the ECM.
Read more
Honda GL1500 GoldWing Fuel Pump Replacement
This article describes replacing a stock fuel pump with an unapproved aftermarket replacement. If you attempt this procedure, you do so at your own risk. You will be dealing with electricity and flammable liquids. Explosion, burns and death are possible outcomes of attempting this procedure. You are fully responsible for all results. OK, now that we have that out of the way . . . Has your GL1500 died under conditions of hot ambient temperatures and high load and then mysteriously restarted and ran fine after it cooled down? You may be experiencing a weak fuel pump.
Read more
1984-1995 Honda Accord/Prelude InTank Fuel Pump
TEST 1. Turn the ignition OFF. 2. On the Accord, remove the screws securing the underdash fuse box to its mount. Remove the fuel cut‐off relay from the back of the fuse block and turn the block so you can see the relay mount. Use a jumper wire to connect the two left‐most terminals of the relay mount (terminal 1 to terminal 2). 3. On Preludes, remove the dashboard under cover; remove the fuel cut‐off relay from the fuse block. Use a jumper wire to connect the top 2 terminals (terminals 1 and 2) of the relay mount. 4. Disconnect the fuel line at the Read more
2008 Volkswagen Touareg R50
Its power of 258 kW / 350 PS (at 3,500 rpm) positions the new Touareg version among the most powerful SUVs in the world. The engine characteristic of the Volkswagen Touareg R50 is marked by a torque level nearly unattainable by the competition: The V10 TDI of the Volkswagen Touareg R50 develops its enormous power of 850 Newton-meter at a low 2,000 rpm. The turbo diesel was derived from the well-known ten cylinder with 230 kW / 313 PS. Adjustments to its turbo charging and modified engine management enabled a 28 kW / 37 PS increase in power and a considerable 100 Newton-meter increase in maximum torque. Under these new parameters, the SUV accelerates to 100 km/h in just 6.7 seconds (production car: 7.4 seconds); its top speed is 235 km/h. In relation to engine power and vehicle size, the fuel consumption of the production ten-cylinder diesel equipped with a particulate filter is a moderate 9.6 liters per 100 km (highway) and 12.6 liters per 100 km (overall). Despite big gains in power and torque, its DIN fuel consumption values have remained constant compared to the Touareg V10 TDI.
Read more
1987 Mercedes Benz 300TD (124 Chassis) Fuel Injection Pump Timing Test
Vehicle application: 1987 Mercedes Benz 300TD (124 Chassis) L6-2996cc 3.0L DSL SOHC Turbo 603
Vehicle Level – Powertrain Management – Computers and Control Systems Testing and Inspection – Related Diagnostic Procedures- Fuel Injection Pump Timing Test (DE-04.07)
This test is divided into the following sections
A. Static RIV Method
B. Dynamic RIV Method
Read more
2007 VW Touareg Moab Expedition
You now have the opportunity to come to Moab, Utah and participate in an exclusive off-road adventure set amongst the most beautiful canyon lands on Earth…and VW provides the Touaregs! To go off-roading in Moab, is to test your machine against the best 4WD trails and most challenging terrain on the planet. TouaregAdventure places you in a new Touareg, with a guide, for three days of incredible four wheeling, and two nights in a spectacular resort. Time to reserve your place now!
Read more
2008 Abt Touareg Unveiled
Abt has made the optically clearly improved version of the SUV from Wolfsburg also very sporty: at the moment, three diesel engines are available, and all of them come with a power increase. That is particularly obvious with the popular 3.0 TDI, which, in this version, delivers 270hp (199kW) instead of the serial 225hp (165kW) and 550Nm torque.
Read more
2008 Hofele Volkswagen Touareg Emotion(al)
The new styling kit for the VW Touareg consists of a complete front bumper with four distinctive additional lights, new LED day driving light and a double light with cornering light and fog light. Big air intakes provide the intercooler of the big engines with more air. Trapezoidal tailpipes made of stainless steel are integrated into the new rear apron. The under ride protection is removable to give access to the trailer coupling.
Side skirts, a rear roof spoiler and a rear door panel are also part of the styling kit. Additionally available is the hood scoop “Power Dome” which gives the ordinary hood more dynamic.
Read more
2007 JE DESIGN Volkswagen Touareg R5
The Touareg R 5 has been given a performance boost, which increases the basic power of the 2.5 l TDI engine from 128 kW / 174 bhp to 152 kW / 206 bhp. Following this performance enhancement, the maximum torque goes up to 460 Nm. JE DESIGN also supplies a performance enhancement package for the Touareg V 10 5.0 TDI, which gives the brawny VW 259 kW / 352 bhp, equating to an increase of 29 kW / 39 bhp. Following this enhancement, the maximum torque is increased from 750 Nm to 855 Nm. Placed between R 5 and V 10, the 3.0 V6 TDI completes the available engine offering. 165 kW / 225 bhp and 500 Nm are the standard values of this engine. A power plus of 45 kW and a torque increased by 50 Nm propel the Touareg in 8,9 seconds from zero to 100 km/h (standard: 9,9 sec) and enable a top speed of 207 km/h (plus 6 km/h).
Read more
1991 Chevy Truck Blazer Full Size Transfer Case Service & Repair
Manual Shift Transfer Case – Transfer Case Replacement – Transfer Case Component Location
NOTICE: When fasteners are removed, always reinstall them at the same location from which they were removed. If a fastener needs to be replaced, use the correct part number fastener for that application. if the correct part number fastener is not available, a fastener of equal size and strength (or stronger may be used. Fasteners that are not reused, and those requiring thread locking compound will be called out. The correct torque value must be used when installing fasteners that require it. If the above conditions are not followed, parts or system damage could result.
Read more
