92-95 Honda Civic TD04H-15G Turbo Kit 1.61 VTEC Installation
TURBO KIT INSTALLATION
* Always disconnect the battery negative cable from the battery negative terminal before working on any part of the vehicle.
STOCK PARTS REMOVAL
(1 ) Unplug the O2 sensor and take the exhaust manifold cover from the exhaust manifold. Then, remove the O2 sensor.
(2) Remove the exhaust manifold by removing the nine 8 mm nuts. Inspect the ex. manifold gasket for any damages, replacing the gasket with a new one is recommended.
(3) Remove the stock air filter box, and air intake duct.
Read more
1996-2000 Honda Civic Performer X Turbocharging System
The Edelbrock Performer X Turbocharging System is a complete Turbo Kit that gives 1996-2000 Honda Civic SOHC
VTEC D16Y8 owners a 60-70 horsepower increase from turbocharging. The Garrett T-28 ball bearing turbo comes pre-assembled
as one unit with a Ni-resist cast exhaust manifold and exhaust elbow, and inlet oil and water lines for the simplest possible
installation. The system includes a high-performance Performer X intake manifold with four additional injectors and a separate
electronic controller to add fuel and retard spark under boosted conditions. The Edelbrock Exhaust manifold and elbow are designed
for maximum flow and high velocity for quicker turbo spool-up. We have included an intercooler, blow-off valve, windshield pillar
mount boost gauge, o-ring sealed compressor flanges, a turbo oil supply adapter, and pre-assembled Russell oil, water, and fuel lines
to make this one of the most complete kits on the market.
Read more
1999-2000 Honda Civic DOHC Vtec B16A2 Performer X Turbocharging System
Description: The Edelbrock Performer X Turbocharging System is a complete Turbo Kit that gives 1999-2000 Honda Civic DOHC VTEC B16A2 owners a 70-80 horsepower increase from turbocharging. The Garrett GT-28RS ball bearing turbo comes pre-assembled as one unit with a Ni-resist cast exhaust manifold and exhaust elbow, and inlet oil and water lines for the simplest possible installation. The system includes a high-performance Victor X intake manifold with four additional injectors and a separate electronic controller to add fuel and retard spark under boosted conditions. The Edelbrock Exhaust manifold and elbow are designed for maximum flow and high velocity for quicker turbo spool-up. We have included an intercooler, blow-off valve, windshield pillar mount boost gauge, a turbo oil supply adapter, and pre-assembled Russell oil, water, and fuel lines to make this one of the most complete kits on the market.
Read more
2001 Honda Civic AC Kit Installation Instructions
The A/C kit and instructions for the 2001 Civic are all new. Follow these instructions carefully. Use only HFC-134a in this system; do not use CFC 12 (Freon); do not install parts designed for use in a CFC system. Use a charging station. A/C charging stations and refrigerant recovery/recycling stations minimize the release of CFCs and HFCs to the atmosphere. Use them for all A/C charging and service work according to the manufacturers’ instructions. Do not overcharge. This system requires only the amount of HFC-134a refrigerant shown below. If you overcharge the system, the engine and the A/C will malfunction.
Read more
2006 Civic Immobilizer Indicator Is Blinking, Engine Won’t Start
The engine does not start, and the immobilizer indicator is blinking (especially if the battery recently went dead and the engine was jump-started).
PROBABLE CAUSE
The immobilizer IMOES code has been erased.
NOTE: This problem occurs only if all these conditions are met: • The security system is set. • The battery goes dead. • Battery power is connected to the vehicle, then disconnected in a very short period of time (milliseconds).
If the vehicle meets these conditions, or if the condition is unknown, go to DIAGNOSIS.
Read more
2004-2006 Chevrolet/GMC LLY/LBZ Duramax Turbo Kit BD Supermax Turbocharger
Pre-Installation
A turbocharger is driven solely on exhaust energy. Therefore, if the vehicles current exhaust manifold is cracked or is leaking, it is recommend that new exhaust gaskets and a heavy-duty exhaust manifold be used.
Installation should occur on a cold vehicle, as turbo and exhaust components become very hot with use.
Read more
2007 speedART Porsche 911 Turbo
Aero-Kit “BTR-XL” for 997 Turbo from speedART (Bi-Turbo Racer Extra Large) now has more down force and an improved aerodynamics with a complete front spoiler including additional front chin spoiler, design-fog lights and air outlet grill (carbon or PU). The rear spoiler with adjustable spoiler wing and air intakes (air ram system). Spoiler wing in carbon or painted version:
Side skirts
Rear diffusor
Read more
Mazda MX5/Miata AVOTurboworld Bolt-On Turbo Kits
AVOTurboworld has been turbo charging motor vehicles for more than 30 years so it’s no surprise that we know exactly what it takes to make a high quality turbo kit for maximum performance and reliability. AVOTurboworld turbo kits use the highest quality components and manufacturing techniques available in the world. AVOTurboworld kits are designed for minimal installation time and ease of fitment. For example, to help expedite the fitment process, we pre-assemble the turbocharger with the actuator assembly to the manifold and outlet casting.
Read more
TechArt Porsche 911 Turbo 997
The new Porsche 911 Turbo of the 997 model range has arrived at the dealers’ showrooms and TechArt Automobildesign presents the sporty TechArt tuning program for the new top-of-the-line model from Zuffenhausen.
Sporty elegance characterizes the design of the TechArt aerodynamic-enhancement kit which was developed in the wind tunnel. The production front apron receives more visual emphasis from the TechArt front spoiler. But that’s not all: The spoiler reduces aerodynamic lift, thus further improving directional stability at high speeds.
Read more
2007 TECHART Porsche 997 Turbo Cabriolet
The TECHART Turbo Cabriolet – Technology and Art. What is created through passionate precision and with the love of detail emphasises the respect towards an inimitable automobile. Dynamic driving through performance and optimum aerodynamics becomes an experience of the highest art with the TECHART Turbo Cabriolet on the basis of the new Porsche 911 Turbo Cabriolet. TECHART Automobildesign merges technology and art to produce a complete work.
Functionality and aesthetics are two inseparable components at TECHART Automobildesign. The 3.6 litre Boxer engine is modified in many details at TECHART. Two special turbo chargers, carbon suction pipes and made to measure intercoolers contribute equally to TECHART performance enhancement as the sport air filter and the stainless steel exhaust system with special manifolds and high performance catalytic converters. All modifications are perfectly coordinated using the newly programmed engine management.
Read more
