92-95 Honda Civic TD04H-15G Turbo Kit 1.61 VTEC Installation

May 25, 2010 by admin · Leave a Comment
Filed under: Honda 

TURBO KIT INSTALLATION
* Always disconnect the battery negative cable from the battery negative terminal before working on any part of the vehicle.
STOCK PARTS REMOVAL
(1 ) Unplug the O2 sensor and take the exhaust manifold cover from the exhaust manifold. Then, remove the O2 sensor.
(2) Remove the exhaust manifold by removing the nine 8 mm nuts. Inspect the ex. manifold gasket for any damages, replacing the gasket with a new one is recommended.
(3) Remove the stock air filter box, and air intake duct.
Read more

1996-2000 Honda Civic Performer X Turbocharging System

June 1, 2010 by admin · Leave a Comment
Filed under: Honda 

The Edelbrock Performer X Turbocharging System is a complete Turbo Kit that gives 1996-2000 Honda Civic SOHC
VTEC D16Y8 owners a 60-70 horsepower increase from turbocharging. The Garrett T-28 ball bearing turbo comes pre-assembled
as one unit with a Ni-resist cast exhaust manifold and exhaust elbow, and inlet oil and water lines for the simplest possible
installation. The system includes a high-performance Performer X intake manifold with four additional injectors and a separate
electronic controller to add fuel and retard spark under boosted conditions. The Edelbrock Exhaust manifold and elbow are designed
for maximum flow and high velocity for quicker turbo spool-up. We have included an intercooler, blow-off valve, windshield pillar
mount boost gauge, o-ring sealed compressor flanges, a turbo oil supply adapter, and pre-assembled Russell oil, water, and fuel lines
to make this one of the most complete kits on the market.
Read more

1999-2000 Honda Civic DOHC Vtec B16A2 Performer X Turbocharging System

May 25, 2010 by admin · Leave a Comment
Filed under: Honda 

Description: The Edelbrock Performer X Turbocharging System is a complete Turbo Kit that gives 1999-2000 Honda Civic DOHC VTEC B16A2 owners a 70-80 horsepower increase from turbocharging. The Garrett GT-28RS ball bearing turbo comes pre-assembled as one unit with a Ni-resist cast exhaust manifold and exhaust elbow, and inlet oil and water lines for the simplest possible installation. The system includes a high-performance Victor X intake manifold with four additional injectors and a separate electronic controller to add fuel and retard spark under boosted conditions. The Edelbrock Exhaust manifold and elbow are designed for maximum flow and high velocity for quicker turbo spool-up. We have included an intercooler, blow-off valve, windshield pillar mount boost gauge, a turbo oil supply adapter, and pre-assembled Russell oil, water, and fuel lines to make this one of the most complete kits on the market.
Read more

1999 Honda Civic EX Sedan Harsh Shifting Automatic Transmission

May 31, 2010 by admin · Leave a Comment
Filed under: Honda 

The transmission shifts harshly, or it may stay in first gear. The harsh shifting is more noticeable on the 1-2 and 2-3 upshifts under light throttle. It is not affected by operating temperature. The MIL may be on with DTC P0730 or P0715 stored. PROBABLE CAUSE Contamination of the linear solenoid and its associated passages inside the transmission, or a broken spring internal to the transmission. Flush the transmission with Genuine Honda ATF-Z1, then replace the linear solenoid. If shift feel is not affected, replace the transmission.
Read more

2001 Honda Civic AC Kit Installation Instructions

May 20, 2010 by admin · Leave a Comment
Filed under: Honda 

The A/C kit and instructions for the 2001 Civic are all new. Follow these instructions carefully. Use only HFC-134a in this system; do not use CFC 12 (Freon); do not install parts designed for use in a CFC system. Use a charging station. A/C charging stations and refrigerant recovery/recycling stations minimize the release of CFCs and HFCs to the atmosphere. Use them for all A/C charging and service work according to the manufacturers’ instructions. Do not overcharge. This system requires only the amount of HFC-134a refrigerant shown below. If you overcharge the system, the engine and the A/C will malfunction.
Read more

Honda Civic, Acura Integra Gauge Bezel Models 20010 and 20011 Installation

June 12, 2010 by admin · Leave a Comment
Filed under: Acura, Honda 

NOTE: Gauge bezel can be painted using a plastic safe paint.
1. Remove stock gauge bezel.
2. Acura Integra – Drill 7⁄64″ hole in the plastic cross member. Install aluminum bracket (Fig. 1). Bracket stud should align with hole in lower center of gauge bezel. Honda Civic – Remove bottom center screw from gauge cluster housing. Reinstall screw and supplied aluminum bracket (Fig. 2).
Read more

Honda Civic Si & Acura RSX Icebox Cold Air Intake Installation Instructions

June 23, 2010 by admin · Leave a Comment
Filed under: Honda 

Comptech Icebox Cold Air Intake for the 2002–2005 Honda Civic-Si and 2002–2005 Acura RSX. All components have been designed and manufactured utilizing the latest in technology and materials. Comptech recommends that you read through these instructions before starting installation and that you use an Acura Factory Shop Manual to supplement these instructions. All Comptech products are intended to be installed by a professional installer. Always use jack stands to support the vehicle when a car lift is not available. Always work in a clean environment and use the appropriate safety equipment to avoid any potential damage or injuries.
Read more

Honda Emergency Response Guide For Hybrid Vehicles

May 29, 2010 by admin · Leave a Comment
Filed under: Honda 

This booklet has been prepared to help emergency response professionals identify Honda gasoline-electric hybrids and respond safely to incidents involving these vehicles. Part 1 presents general information and recommendations that apply to all Honda hybrids produced through the 2005 model year. Part 2 contains model-specific information for each of the three current hybrids: the Insight, the Civic Hybrid, and the Accord Hybrid. This guide will be updated or replaced as Honda, and Acura, introduce new hybrid vehicles. We hope this publication provides the kind of information you need. Thank you for your concern and efforts in protecting Honda customers and the general public.
Read more

1996-2000 Honda Civic EX, GX, LX Sedan Signal Mirror Installation Instructions

June 1, 2010 by admin · Leave a Comment
Filed under: Honda 

Door panel removal
1. Open door and lower window.
2. Remove screw from center of armrest and remove armrest from door.
3. Disconnect wire from behind window control panel.
4. Remove screw from behind door handle and remove door handle cover.
5. Disconnect wire from behind door handle cover.
6. Remove speaker cover.
Read more

1998 Honda Civic EX Fuses & Circuit Breakers

June 1, 2010 by admin · Leave a Comment
Filed under: Honda 

When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
UNDER-DASH FUSE/RELAY BOX NOTE: Under-dash fuse/relay box is located under driver’s side of instrument panel.
Read more

Next Page »

?>