2001-2005 Ford Taurus Camshaft Tick Noise—3.0L 4V Engine
This article supersedes TSB 04-20-8 to update the vehicle model years and Service Procedure. ISSUE Some 2001-2005 Taurus/Sable, 2001-2006 Escape and 2005-2006 Mariner vehicles built prior to 1-17-2006 equipped with the 3.0L 4V Duratec engine may exhibit a ticking noise from the left bank cylinder head, with the engine at normal operating temperature only.
Read more
2008 Ford Taurus Pricing
The new 2008 Ford Taurus – the most powerful, refined, roomiest and safest Taurus ever – will have a base manufacturer’s suggested retail price (MSRP) of $23,995, including destination and delivery. Comparably equipped, Ford’s iconic family sedan will be priced thousands of dollars less than sedans like the Toyota Avalon and the Chrysler 300.
Nearly 7 million Ford Taurus sedans have been built since 1985, and it remains one of the most recognized Ford vehicle names of all time – trailing only the Ford F-Series and Mustang.
Read more
2001-2004 Ford Taurus Water In The Blower Case—Blower Motor
Inspect and seal cowl area and install Rain-Hat Extension Seal. Inspect and replace blower motor and/or blower motor resistor if there is evidence of water/corrosion. Refer to the following Service.
Procedure for details.
SERVICE PROCEDURE
1. Access blower motor and resistor per the Workshop Manual Sections 412-02 and 412-04. Inspect for evidence of water/corrosion. If water/corrosion are found or parts have failed, replace per Workshop Manual (blower motor 1F1Z-19805-AA and resistor F6DZ-19A706-AA).
Read more
2001 Ford Taurus V6-3.0L VIN U Front Door Trim Panel Installation
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the front door trim panel screws.
3. NOTE: The front door trim panel has five two-part pin-type retainers. Then male part of the trim retainer will remain with Read more
2005 Ford Taurus Engine Controls Vacuum Leakage Noise Possible DTC’s
Some 2005 Taurus and Sable vehicles equipped with a 3.0L 2V and some 2003-
2005 Lincoln LS vehicles equipped with a 3.0L 4V engine may exhibit a vacuum
leakage noise or lean codes and/or malfunction indicator lamp (MIL) on. The
cause may be a leak at the 0-ring on the intake manifold tuning (IMT) valve.
ACTION
Follow the Service Procedure steps to correct the condition.
Read more
2008 Ford Taurus LTD AWD
There are several changes for this car, this year. First, it loses the Five Hundred name and is now called Taurus. Next, a 3.5L engine supplants the 3.0L V6 and the continuously variable (CVT) transmission has been retired. Finally, there is a refreshed exterior and improvements to the interior and safety equipment. The drive wheels are up front, but an optional on-demand, four-wheel-drive system is available for both trim versions, SEL and Limited.
Read more
1993 Taurus SHO ATX to MTX conversion
I’ve always wanted a 5-speed SHO, but my ’93 ATX has deep sentimental value and is in great condition. And I certainly can’t afford to be fixing/modding two SHOs, so what to do? Take a rusted-body $150 MTX SHO, $3k in new/used parts, and several long days to realize that dream! 1993 Taurus SHO 3.2L ATX – 116k miles (original transmission) Before he passed away two years ago, my younger brother poured his heart and soul into this car. No way could I ever get rid of his baby.. so lets make it faster instead (he woulda loved this). 1990 Taurus SHO 3.0L MTX – 160k miles (mechanically sound, body = New York hard life) Purchased for $150 from my buddy, AP. I was disturbed by how much quicker it was than the ATX. I kept telling myself it was the corrosion lightening mods that made it faster.
Read more
2001-2008 Mazda Tribute 3.0L Chamshaft Ticking Noise Service Bulletin
This bulletin supersedes the previous bulletin 01-032/06, issued on 10/12/2006. The APPLICABLE MODEL(S)/ VINS, DESCRIPTION, REPAIR PROCEDURE, and WARRANTY INFORMATION have been revised. Some vehicles equipped with a 3.0L engine may exhibit a ticking noise from the left bank cylinder head while the engine is running at normal operating temperature. Customers having this concern should have their vehicle repaired using the following repair procedure. Use the table below to select the correct repair for the applicable model.
Read more
1993 Taurus/Sable Bumpers Removal and Installation
Bumpers Refer to the following illustrations when performing Removal and Installation procedures on the front and rear bumper assemblies. CAUTION: Never apply excessive heat to bumper surface. Heat could cause distortion of the bumper. CAUTION: When collecting exhaust fumes in service area, never attach a metal collector to the exhaust tail pipe because the heat could damage the bumper.
Read more
2001 Lexus GS 300 L6-3.0L (2JZ-GE) – Blower Motor Assembly
REMOVAL
1. REMOVE No.2 UNDER COVER
2. REMOVE BLOWER MOTOR
a. Disconnect the connector.
b. Remove the 3 screws and blower motor.
Read more
