Honda Civic Si & Acura RSX Icebox Cold Air Intake Installation Instructions
Comptech Icebox Cold Air Intake for the 2002–2005 Honda Civic-Si and 2002–2005 Acura RSX. All components have been designed and manufactured utilizing the latest in technology and materials. Comptech recommends that you read through these instructions before starting installation and that you use an Acura Factory Shop Manual to supplement these instructions. All Comptech products are intended to be installed by a professional installer. Always use jack stands to support the vehicle when a car lift is not available. Always work in a clean environment and use the appropriate safety equipment to avoid any potential damage or injuries.
Read more
1993 Taurus SHO ATX to MTX conversion
I’ve always wanted a 5-speed SHO, but my ’93 ATX has deep sentimental value and is in great condition. And I certainly can’t afford to be fixing/modding two SHOs, so what to do? Take a rusted-body $150 MTX SHO, $3k in new/used parts, and several long days to realize that dream! 1993 Taurus SHO 3.2L ATX – 116k miles (original transmission) Before he passed away two years ago, my younger brother poured his heart and soul into this car. No way could I ever get rid of his baby.. so lets make it faster instead (he woulda loved this). 1990 Taurus SHO 3.0L MTX – 160k miles (mechanically sound, body = New York hard life) Purchased for $150 from my buddy, AP. I was disturbed by how much quicker it was than the ATX. I kept telling myself it was the corrosion lightening mods that made it faster.
Read more
1996-2001 Audi A4 B5 Panzer Plate Skid Plate Installation Instructions
First-time Install Procedure:
Raise car in the air: Use either ramps and wheel chocks or a jack and a pair of jack stands, or a car lift. Car must be raised on both sides for procedure to work.
Remove old belly pan:
1. Put on safety goggles. Remove old plastic belly pan if you still have one installed on your car. Save all 1/4 turn Dzus screws, if present, in provided zip-loc bag. You will not need these for the install but it’s nice to have spares.
2. Remove rear mount of belly pan, if present, with a 10mm wrench (the one with three receptacles on it.). Remove all three 1/4 turn screw (Dzus) receptacles, if present, and save them as spares in provided zip-loc bag. You might want to degrease them first
Read more
