MK Indy Build Manual
As with everything we do at MK, this manual has been produced with attention to detail. The clear plastic cover assembly allows you to sort the page you are working on to the top. This build manual for our MK Indy is based around the Ford Sierra SOHC (Pinto) engine with Ford carb’s as a donor vehicle, although other variations may be used including bike engines. This manual should be used in conjunction with the Haynes, or equivalent, Ford Sierra workshop manual, for dismantling, overhauling & re-assembly of Ford parts & the SVA manual for compliance.
Read more
1996-2001 Audi A4 B5 Panzer Plate Skid Plate Installation Instructions
First-time Install Procedure:
Raise car in the air: Use either ramps and wheel chocks or a jack and a pair of jack stands, or a car lift. Car must be raised on both sides for procedure to work.
Remove old belly pan:
1. Put on safety goggles. Remove old plastic belly pan if you still have one installed on your car. Save all 1/4 turn Dzus screws, if present, in provided zip-loc bag. You will not need these for the install but it’s nice to have spares.
2. Remove rear mount of belly pan, if present, with a 10mm wrench (the one with three receptacles on it.). Remove all three 1/4 turn screw (Dzus) receptacles, if present, and save them as spares in provided zip-loc bag. You might want to degrease them first
Read more
